GenTent GT10KBRD 10K Stormbracer for Ridgid RD Portable Generators

Usually Leaves Warehouse in 2 - 3 Business Days
Sku:
GENTENT-GT10KBRD
 

WeatherProof Your Power™ with the Patented GenTent® 10k Stormbracer® for Generators

A major problem with portable generators is the fact that they should not get wet or be run in enclosed spaces! This can cause quite an issue since generators are most often used during heavy rain or snowstorms. The GenTent Stormbracer cover has been lab tested to withstand winds up to 70 mph, snow loads of up to 18" and rain up to 12" a day. With ratings like this, there is no need to store your generator in a garage or shed, no more having to pull it out or run it indoors (which should never happen!). Avoid possible catastrophes like CO poisoning, electrocution or generator damage with a GenTent Stormbracer cover! The GenTent's line of generator covers offer a simple, straightforward solution, and work to protect your generator so that it can be safely used at the times you need it most.
 
A GenTent GT10KBRD Stormbracer running cover is perfect for specific Ridgid RD portable generator from 6,000 Watts and higher. With a GenTent running cover, your generator stays covered at all times so it can be kept a safe distance from your home and is ready to hook up and switch on as soon as the power goes out. The GenTent GT10KBRD Stormbracer Bundle includes the Ridgid Frame Kit with two slotted frame members and mounting hardware for Ridgid Generators. Once the frame is adapted no further tools are necessary. Frame posts may install through front feet on frame and screw through slots at top, or must be screwed to frame bottom and top (screws included).
 
With a GenTent Stormbracer, you never need to remove any part of the cover. There is a large door flap that opens allowing for easy refueling. The protective side aprons give you easy access to the electrical panel and the frame and cover maintains your generators natural air flow and intake.
 
No Tools Are Required to set up your GenTent Package. Included with your purchase is setup instructions and product safety manual, links to detailed, step by step setup videos, and free post installation follow-up - just send photos to GenTent. Everything you need is included in your package, regardless of the edition you choose:
  • Adapt It - Two slotted frame members and mounting hardware included 
  • Clamp It - Four complete clamps each including the clamp body, extending rod, stainless steel bolt/washer, rod setting clip, and rubber sleeve adapter accommodate round tubular frames from 1" up to 1.5" around.
  • Frame It - High strength dual catalyst fiberglass frame rods and central connector
  • Cover It - Main generator tent canopy cover with short side and long side electrical covering aprons. Simply match the appropriate apron length electrical panel side with 6" wrap-arounds
 
 
The GT10KBRD generator tent can be used with several brands of generators including but not limited to:
  • Briggs & Stratton 01894
  • Ridgid RD6800, RD8000, RD80011, RD8800, RD903612, RD906500P, RD906812, RD906814P, RD907000P, RD907500P, RD908000, RD9C7000BG
  • Troy-Bilt 01925, 030237
Additionally, the GT10KBRD will fit numerous other models and brands that are 6,000 Watts and higher. If your model is not listed above, please feel free to call us and a sales person will be happy to assist you.
 
Two editions of the GenTent Stormbracer are available in your choice of color. Available is the Standard Edition (assembled in the USA) and the Extreme Edition (made in the USA). Both are available in Tan Light with Black Trim or Grey Skies with Black Trim. Both editions include hardware components that are Made in the USA.
 
The canopy on the Standard Edition is constructed of NFPA 701 FR rated vinyl laminated polyester and is rated from -15°F - 185°F (-25°C - 85°C), outdoor rated elastic and outdoor rated hook and loop. The canopy is covered by a 1 year limited warranty.
  • Standard Edition (1 yr Canopy/3 yr Hardware* Warranty):
    • Tan Light with Black Trim (GT10KBRDTB)
    • Grey Skies with Black Trim (GT10KBRDGB)
 
The canopy included with the Extreme Edition is constructed of NFPA 701 FR rated, UV treated, vinyl coated polyester and is rated from -45°F - 185°F (-45°C - 85°C), outdoor rated Gore elastic and genuine Velcro hook and loop. The canopy is covered by a 3 year limited warranty.
  • Extreme Edition (3 yr Warranty):
    • Tan Light with Black Trim (GT10KCRDTB)
    • Grey Skies with Black Trim (GT10KCRDUB)
 
*Hardware Components are all Made in the USA and carry a 3 year warranty regardless of your choice of Standard Edition or Extreme Edition Canopy. Components include the glass filled nylon clamps, rubber sleeves, stainless steel bolts/washers, nylon self-locking knob, polystyrene clamp clip, and fiberglass rods.
$179.94
GenTent GT10KBRD 10K Stormbracer Bundle for Ridgid RD portable Generators
Customer Reviews
FREE SHIPPING ON ALL ORDERS!
 

WeatherProof Your Power™ with the Patented GenTent® 10k Stormbracer® for Generators

A major problem with portable generators is the fact that they should not get wet or be run in enclosed spaces! This can cause quite an issue since generators are most often used during heavy rain or snowstorms. The GenTent Stormbracer cover has been lab tested to withstand winds up to 70 mph, snow loads of up to 18" and rain up to 12" a day. With ratings like this, there is no need to store your generator in a garage or shed, no more having to pull it out or run it indoors (which should never happen!). Avoid possible catastrophes like CO poisoning, electrocution or generator damage with a GenTent Stormbracer cover! The GenTent's line of generator covers offer a simple, straightforward solution, and work to protect your generator so that it can be safely used at the times you need it most.
 
A GenTent GT10KBRD Stormbracer running cover is perfect for specific Ridgid RD portable generator from 6,000 Watts and higher. With a GenTent running cover, your generator stays covered at all times so it can be kept a safe distance from your home and is ready to hook up and switch on as soon as the power goes out. The GenTent GT10KBRD Stormbracer Bundle includes the Ridgid Frame Kit with two slotted frame members and mounting hardware for Ridgid Generators. Once the frame is adapted no further tools are necessary. Frame posts may install through front feet on frame and screw through slots at top, or must be screwed to frame bottom and top (screws included).
 
With a GenTent Stormbracer, you never need to remove any part of the cover. There is a large door flap that opens allowing for easy refueling. The protective side aprons give you easy access to the electrical panel and the frame and cover maintains your generators natural air flow and intake.
 
No Tools Are Required to set up your GenTent Package. Included with your purchase is setup instructions and product safety manual, links to detailed, step by step setup videos, and free post installation follow-up - just send photos to GenTent. Everything you need is included in your package, regardless of the edition you choose:
  • Adapt It - Two slotted frame members and mounting hardware included 
  • Clamp It - Four complete clamps each including the clamp body, extending rod, stainless steel bolt/washer, rod setting clip, and rubber sleeve adapter accommodate round tubular frames from 1" up to 1.5" around.
  • Frame It - High strength dual catalyst fiberglass frame rods and central connector
  • Cover It - Main generator tent canopy cover with short side and long side electrical covering aprons. Simply match the appropriate apron length electrical panel side with 6" wrap-arounds
 
 
The GT10KBRD generator tent can be used with several brands of generators including but not limited to:
  • Briggs & Stratton 01894
  • Ridgid RD6800, RD8000, RD80011, RD8800, RD903612, RD906500P, RD906812, RD906814P, RD907000P, RD907500P, RD908000, RD9C7000BG
  • Troy-Bilt 01925, 030237
Additionally, the GT10KBRD will fit numerous other models and brands that are 6,000 Watts and higher. If your model is not listed above, please feel free to call us and a sales person will be happy to assist you.
 
Two editions of the GenTent Stormbracer are available in your choice of color. Available is the Standard Edition (assembled in the USA) and the Extreme Edition (made in the USA). Both are available in Tan Light with Black Trim or Grey Skies with Black Trim. Both editions include hardware components that are Made in the USA.
 
The canopy on the Standard Edition is constructed of NFPA 701 FR rated vinyl laminated polyester and is rated from -15°F - 185°F (-25°C - 85°C), outdoor rated elastic and outdoor rated hook and loop. The canopy is covered by a 1 year limited warranty.
  • Standard Edition (1 yr Canopy/3 yr Hardware* Warranty):
    • Tan Light with Black Trim (GT10KBRDTB)
    • Grey Skies with Black Trim (GT10KBRDGB)
 
The canopy included with the Extreme Edition is constructed of NFPA 701 FR rated, UV treated, vinyl coated polyester and is rated from -45°F - 185°F (-45°C - 85°C), outdoor rated Gore elastic and genuine Velcro hook and loop. The canopy is covered by a 3 year limited warranty.
  • Extreme Edition (3 yr Warranty):
    • Tan Light with Black Trim (GT10KCRDTB)
    • Grey Skies with Black Trim (GT10KCRDUB)
 
*Hardware Components are all Made in the USA and carry a 3 year warranty regardless of your choice of Standard Edition or Extreme Edition Canopy. Components include the glass filled nylon clamps, rubber sleeves, stainless steel bolts/washers, nylon self-locking knob, polystyrene clamp clip, and fiberglass rods.