RAVTRANS kit is required when replacing an AZ75/AZ85 series vertical air conditioner with a new AZ91 series vertical air conditioner. The AZ91H fits into the RAVTRANS and the RAVTRANS fits inside existing wall plenums when replacing an older unit. All new AZ91H VTAC units are hardwire only. An electrician is required may be required to hardwire your new unit if you are replacing an existing system. The new AZ91H Series are FRONT INSTALL ONLY.
It is a transition piece that adapts the new vertical air conditioner systems to fit the older wall plenums. It will add about 2.5" to the depth (front to back). It is to be used with:
- RAVWP6 - for installations with walls up to 6" thick
- RAVWP8 - for installations with walls up to 8" thick
- RAVWP12 - for installations with walls up to 12" thick
- RAVWP15 - for installations with walls up to 15" thick
The kit includes the transition plenum, 4 pieces of insulation (top, bottom and 2 side pieces), drain pan and 6 screws.