Inside the UltraSaver90Plus:

- Creating Heat - The power-vent blower draws in an ideal charge of air (White Arrow) to support combustion.
- The high-efficient in-shot burners generate the heat (Orange Arrows). (One burner in the PVS18 and two burners in the PVS35). The two-stage heat exchanger consists of a large-diameter tube and multiple small-diameter stainless steel finned tubes. Each transfers progressively more heat.
- Cooled exhaust exists the heater via PVC (or Empire approved Poly vent pipe) at 110 to 120 degrees F (Green Arrows).
- Circulating Heat - The blower pulls room air (Blue Arrows) into the top of the heater and forces it across the heat exchanger. The warm air (Red Arrows) exists through the bottom louvers at the front of the heater.
- Vents with low-cost PVC or PolyPro venting
- Works with most programmable thermostats
- Whisper quiet operation
- 92% AFUE Efficiency Rating
This heater MUST be installed by a licensed technician.
-
- Heating BTUs:
- 17500
-
- Type of Venting:
- B-Vent (Direct Vent Option)
-
- AFUE Efficiency %:
- 92%
-
- Mounting:
- Wall
-
- AFUE Efficiency:
- 90
-
- Blower:
- Included
-
- CFMs:
- 210
-
- Vent Connection Size (in.):
- 2
-
- Gas Connection Size:
- 1/2"
-
- Ignition Type:
- Electronic Ignition
-
- Clearance Top to Ceiling (in.):
- 12
-
- Clearance Access Door Side:
- 8
-
- Width (in.):
- 36.125
-
- Depth (in.):
- 13
-
- Height (in.):
- 27.875
-
- Net Weight (lbs.):
- 112
-
- Parts Warranty:
- 5 Years
-
- Labor Warranty:
- 2 Years
-
- Combustion Chamber Warranty:
- 10 Year