Goodman CAPF3636D6 3.0 Ton Indoor Evaporator Coil

Usually Leaves Warehouse in 2 - 3 Business Days
Sku:
GOODMAN-CAPF3636D6

The CAPF3636D6 evaporator coil is used in combination with a furnace and split air conditioner or heat pump system. The Goodman CAPF series units are cased coils and feature a flowrater valve. This type of valve has a fixed orifice and is constructed to deliver a fixed amount of refrigerant to the coil, regardless of conditions. All Goodman coil feature an all-aluminum tube and fin coil design. The use of single metal construction and a grooved tube help to deliver the maximum in heat transfer efficiency. Aluminum construction helps to hinder potential corrosion.

Like other Goodman products, the cabinet has a galvanized leather grain-embossed finish. Each unit features foil-faced insulation on the interior of the casing to reduce cabinet condensate. A split seam is located on the front of the cabinet for easy access. Thermoplastic drain pans resist rust and the harmful effects of UV rays. They are constructed of DecaBDE-free thermoplastic and have a low water-retention design.

The CAPF series of evaporator coils can be connected for use in an upflow or downflow application. In an upflow installation you can take advantage of the natural flow the heat. In this type of installation, cold air enters at the bottom and hot air is exhausted out the top. The opposite is true in a downflow installation. Usually installed in attics, this installation takes cooler air into the top of the unit and released out the bottom or downward into the space. The CAPF evaporator coils use R410A or R22 refrigerants.

  • Nominal Cooling Tons: 3.0
  • Service Valve Liquid Connection Size: 3/8"
  • Service Valve Suction Connection Size: 7/8"
  • Nominal Width for Gas Furnace: 24.5"
  • Plenum Width: 23.5"
  • Dimensions: 24.5"w x 21.0"d x 22.0"h

 

The evaporator coil cabinet is 21" deep for easier attic access. This unit can be purchased by anyone, however, HVAC systems must be installed by a certified HVAC technician. An HVAC installer will have the knowledge and tools required to make sure your new system is up and running properly.

Like all Goodman equipment, evaporator coils are built in America and built to last. They include a 10 year parts limited warranty and are AHRI Certified and ETL Listed.


Looking for a qualified installer? Allow Preferred Contractor to help. Preferred Contractor has a nationwide network of trained air conditioner installers. Click here to fill out the form and get started. An HVAC expert will contact you to learn about your needs and get a quote for you whether you have already purchased the equipment or are just starting to research.

$353.00
Goodman CAPF3636D6 3.0 Ton Indoor Evaporator Coil
Customer Reviews
FREE SHIPPING ON ALL ORDERS!

The CAPF3636D6 evaporator coil is used in combination with a furnace and split air conditioner or heat pump system. The Goodman CAPF series units are cased coils and feature a flowrater valve. This type of valve has a fixed orifice and is constructed to deliver a fixed amount of refrigerant to the coil, regardless of conditions. All Goodman coil feature an all-aluminum tube and fin coil design. The use of single metal construction and a grooved tube help to deliver the maximum in heat transfer efficiency. Aluminum construction helps to hinder potential corrosion.

Like other Goodman products, the cabinet has a galvanized leather grain-embossed finish. Each unit features foil-faced insulation on the interior of the casing to reduce cabinet condensate. A split seam is located on the front of the cabinet for easy access. Thermoplastic drain pans resist rust and the harmful effects of UV rays. They are constructed of DecaBDE-free thermoplastic and have a low water-retention design.

The CAPF series of evaporator coils can be connected for use in an upflow or downflow application. In an upflow installation you can take advantage of the natural flow the heat. In this type of installation, cold air enters at the bottom and hot air is exhausted out the top. The opposite is true in a downflow installation. Usually installed in attics, this installation takes cooler air into the top of the unit and released out the bottom or downward into the space. The CAPF evaporator coils use R410A or R22 refrigerants.

  • Nominal Cooling Tons: 3.0
  • Service Valve Liquid Connection Size: 3/8"
  • Service Valve Suction Connection Size: 7/8"
  • Nominal Width for Gas Furnace: 24.5"
  • Plenum Width: 23.5"
  • Dimensions: 24.5"w x 21.0"d x 22.0"h

 

The evaporator coil cabinet is 21" deep for easier attic access. This unit can be purchased by anyone, however, HVAC systems must be installed by a certified HVAC technician. An HVAC installer will have the knowledge and tools required to make sure your new system is up and running properly.

Like all Goodman equipment, evaporator coils are built in America and built to last. They include a 10 year parts limited warranty and are AHRI Certified and ETL Listed.


Looking for a qualified installer? Allow Preferred Contractor to help. Preferred Contractor has a nationwide network of trained air conditioner installers. Click here to fill out the form and get started. An HVAC expert will contact you to learn about your needs and get a quote for you whether you have already purchased the equipment or are just starting to research.

  • Cooling Capacity (Tonnage):
    3 Tons
  • Plenum Opening - Width (in.):
    23.5
  • Nominal Furnace Width (in.):
    24.5
  • TXV Installed:
    No
  • Installation Type:
    Upflow or Downflow
  • Service Valve Liquid (in.):
    3/8
  • Service Valve Suction (in.):
    7/8
  • Height (in.):
    22
  • Width (in.):
    24.5
  • Depth (in.):
    21
  • Certifications:
    AHRI Certified; ETL Listed
  • Parts Warranty:
    10 Years