The CAPF3636C6 evaporator coil is used in combination with a furnace and split air conditioner or heat pump system. The Goodman CAPF series coils are cased coils and feature a flowrater valve. This type of valve has a fixed orifice and is constructed to deliver a fixed amount of refrigerant to the coil, regardless of conditions. Standard on all Goodman coils is the all-aluminum tube and fin coil construction. Goodman uses a single metal, aluminum, and a grooved tube help to deliver the maximum in heat transfer efficiency. Aluminum is also used to help combat potential corrosion.
The cabinet is finished in the same galvanized, leather grain-embossed finish as other Goodman system components. Each unit features foil-faced insulation on the interior of the casing to reduce cabinet condensate. The front of the cabinet has a split seam for easy access. Drain pans feature a low water-retention design and are made of DecaBDE-free thermoplastic. The thermoplastic design resists rust and is UV-resistant.
The CAPF series of evaporator coils can be installed for use in an upflow or downflow application. In an upflow installation you can take advantage of the natural flow the heat. In this type of setup, cold air enters at the bottom and hot air is exhausted out the top. The opposite is true in a downflow installation. Usually installed in attics, this installation takes cooler air into the top of the unit and released out the bottom or downward into the space. The CAPF evaporator coils require either R410A or R22 refrigerants.
- Nominal Cooling Tons: 3.0
- Service Valve Liquid Connection Size: 3/8"
- Service Valve Suction Connection Size: 7/8"
- Nominal Width for Gas Furnace: 21.0"
- Plenum Width: 20.0"
- Dimensions: 21.0"w x 21.0"d x 22.00"h
The evaporator coil cabinet is 21" deep to allow for easy attic installation. The CAPF3636C6 can be purchased by anyone, however, HVAC systems must be installed by a certified HVAC technician. An HVAC tech will have the experience required to ensure that your system functions to its highest ability.
Like all Goodman equipment, evaporator coils are designed, engineered, and built in the USA and built to last. Coils have a 10 year limited parts warranty. They are also AHRI Certified and ETL Listed.
Looking for a qualified installer? Allow Preferred Contractor to help. Preferred Contractor has a nationwide network of trained air conditioner installers. Click here to fill out the form and get started. An HVAC expert will contact you to learn about your needs and get a quote for you whether you have already purchased the equipment or are just starting to research.
- Cooling Capacity (Tonnage):
- 3 Tons
- Plenum Opening - Width (in.):
- Nominal Furnace Width (in.):
- TXV Installed:
- Installation Type:
- Upflow or Downflow
- Service Valve Liquid (in.):
- Service Valve Suction (in.):
- Height (in.):
- Width (in.):
- Depth (in.):
- AHRI Certified; ETL Listed
- Parts Warranty:
- 10 Years