The CAPF3636A6 evaporator coil is used in combination with a furnace and split air conditioner or heat pump system. The Goodman CAPF series coils are cased coils and feature a flowrater valve. This type of valve has a fixed orifice and is configured to deliver a fixed amount of refrigerant to the coil, regardless of conditions. Featured on all Goodman coils is the all-aluminum tube and fin coil construction. The use of single metal construction and a grooved tube help to give the utmost in heat transfer efficiency. Aluminum construction helps to withstand potential corrosion.
The cabinet is finished in the same galvanized, leather grain-embossed finish as other Goodman system components. Each unit features foil-faced insulation on the interior of the casing to reduce cabinet condensation. A split seam is located on the front of the cabinet for easy access. Drain pans feature a low water-retention design and are made of DecaBDE-free thermoplastic. The thermoplastic design resists rust and is UV-resistant.
The CAPF series of evaporator coils can be set up for use in an upflow or downflow application. In an upflow installation you can take advantage of the natural flow the heat. In this type of installation, cold air enters at the bottom and hot air is exhausted out the top. The opposite is true in a downflow installation. Usually installed in attics, this installation takes cooler air into the top of the unit and released out the bottom or downward into the space. The CAPF evaporator coils can use either R410A or R22 refrigerants.
- Nominal Cooling Tons: 3.0
- Service Valve Liquid Connection Size: 3/8"
- Service Valve Suction Connection Size: 7/8"
- Nominal Width for Gas Furnace: 14.0"
- Plenum Width: 13.0"
- Dimensions: 14.0"w x 21.0"d x 22.0"h
The unit cabinet is 21" deep for easier attic access. Professional installation by an HVAC contractor is required. An HVAC contractor will have the knowledge and tools required to ensure that your system functions to its highest ability.
Like all Goodman products, evaporator coils are designed, engineered, and built in the USA and built to last. They feature a 10 year parts limited warranty and are AHRI Certified and ETL Listed.
Looking for a qualified installer? Allow Preferred Contractor to help. Preferred Contractor has a nationwide network of trained air conditioner installers. Click here to fill out the form and get started. An HVAC expert will contact you to learn about your needs and get a quote for you whether you have already purchased the equipment or are just starting to research.
- Cooling Capacity (Tonnage):
- 3 Tons
- Plenum Opening - Width (in.):
- Nominal Furnace Width (in.):
- TXV Installed:
- Installation Type:
- Upflow or Downflow
- Service Valve Liquid (in.):
- Service Valve Suction (in.):
- Height (in.):
- Width (in.):
- Depth (in.):
- AHRI Certified; ETL Listed
- Parts Warranty:
- 10 Years