Evaporator coils are used in conjunction with split air conditioners - with or without heat pumps. The Goodman CAPF series units are cased coils and feature a flowrater valve. This type of valve has a fixed orifice and is configured to deliver a fixed amount of refrigerant to the coil, regardless of conditions. Included on all Goodman coils is the all-aluminum tube and fin coil construction. Goodman uses a single metal, aluminum, and a grooved tube help to deliver the maximum in heat transfer efficiency. Aluminum is also used to help resist potential corrosion.
Like other Goodman products, the cabinet has a galvanized leather grain-embossed finish. Foil-faced insulation covers the casing inside to reduce cabinet condensation. A split seam is located on the front of the cabinet for easy access. Thermoplastic drain pans resist rust and the detrimental effects of UV rays. They are constructed of DecaBDE-free thermoplastic and have a low water-retention design.
The CAPF series of evaporator coils can be connected for use in an upflow or downflow application. In an upflow installation you can take advantage of the natural flow the heat. In this type of setup, cold air enters at the bottom and hot air is exhausted out the top. The opposite is true in a downflow installation. Usually installed in attics, this installation takes cooler air into the top of the unit and released out the bottom or downward into the space. The CAPF1824B6 evaporator coils utilize either R410A or R22 refrigerants.
- Nominal Cooling Tons: 1.5 - 2
- Service Valve Liquid Connection Size: 3/8"
- Service Valve Suction Connection Size: 3/4"
- Nominal Width for Gas Furnace: 17.5"
- Plenum Width: 16.5"
- Dimensions: 17.5"w x 21.0"d x 18.0"h
The unit cabinet is 21" deep for easier attic access. Professional installation by an HVAC contractor is required. An HVAC contractor will have the experience required to make sure your new system is up and running properly.
Goodman evaporator coils are designed and assembled in the USA. Coils have a 10 year limited parts warranty. They are also AHRI Certified and ETL Listed.
Looking for a qualified installer? Allow Preferred Contractor to help. Preferred Contractor has a nationwide network of trained air conditioner installers. Click here to fill out the form and get started. An HVAC expert will contact you to learn about your needs and get a quote for you whether you have already purchased the equipment or are just starting to research.
- Cooling Capacity (Tonnage):
- 2 Tons
- Plenum Opening - Width (in.):
- Nominal Furnace Width (in.):
- TXV Installed:
- Installation Type:
- Upflow or Downflow
- Service Valve Liquid (in.):
- Service Valve Suction (in.):
- Height (in.):
- Width (in.):
- Depth (in.):
- AHRI Certified; ETL Listed
- Parts Warranty:
- 10 Years