Empire Comfort Systems SR-18T Vent-Free Gas Heater/Thermostat Control

Usually Leaves Warehouse in 2 - 3 Business Days
Sku:
EMPIRE-SR18T
The SR18T is an infrared gas heater. It is compact in size and will install on a wall. It features top mounted, thermostatic controls and will add radiant heat to your medium sized rooms. It is a Vent-Free heater and is intended to be used only as a supplemental or secondary heat source. If window condensation problems are common in your home, installing a vent-free heater may not be a good option for you.

 

Available in Natural Gas SR-18TN and Liquid Propane SR-18TL

  • Push-button ignitor lights the pilot (eliminating the need for matches)
  • Test-fired in the factory
  • Oxygen-Depletion Sensor shuts off the unit if there is not enough available fresh air
  • Durable, neutral colored, scratch-resistant finish
  • Gas heats an area efficiently and for less than half the cost of electricity
  • Gas heat also continues to function in the event of a power outage
This heater can be installed in an aftermarket manufactured (mobile) home, where not prohibited by state or local codes. A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
$497.70 $439.00
(You save $58.70)
Empire Comfort Systems SR-18T Vent-Free Gas Heater/Thermostat Control
Customer Reviews
FREE SHIPPING ON ALL ORDERS!
The SR18T is an infrared gas heater. It is compact in size and will install on a wall. It features top mounted, thermostatic controls and will add radiant heat to your medium sized rooms. It is a Vent-Free heater and is intended to be used only as a supplemental or secondary heat source. If window condensation problems are common in your home, installing a vent-free heater may not be a good option for you.

 

Available in Natural Gas SR-18TN and Liquid Propane SR-18TL

  • Push-button ignitor lights the pilot (eliminating the need for matches)
  • Test-fired in the factory
  • Oxygen-Depletion Sensor shuts off the unit if there is not enough available fresh air
  • Durable, neutral colored, scratch-resistant finish
  • Gas heats an area efficiently and for less than half the cost of electricity
  • Gas heat also continues to function in the event of a power outage
This heater can be installed in an aftermarket manufactured (mobile) home, where not prohibited by state or local codes. A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
  • Heating BTUs:
    18000
  • Control Type:
    Thermostatic
  • Number of Control Settings:
    5
  • Ignition Type:
    Standing Pilot
  • Blower:
    Optional
  • Floor Stand Kit:
    Optional
  • Wall Mounting Kit:
    Included
  • Gas Connection Size:
    3/8"
  • Flame Type:
    Infrared/Radiant
  • Width (in.):
    18
  • Depth (in.):
    6.5
  • Height (in.):
    22
  • Clearance to Side Wall (in.):
    6
  • Clearance Top to Ceiling (in.):
    24
  • Clearance Bottom to Floor:
    2
  • Net Weight (lbs.):
    27
  • Certifications:
    AHRI, Design Certified
  • Parts Warranty:
    5 Years
  • Labor Warranty:
    None