Empire Comfort Systems SR-10T Vent-Free Gas Heater/Thermostat Control

Usually Leaves Warehouse in 2 - 3 Business Days
Sku:
EMPIRE-SR10T
Space-saving efficiency and top-mounted controls make the SR-10T an outstanding heater to add radiant heat to your smaller rooms and, when allowed, the SR10T is even ideal for bedrooms. Gas heaters are more cost efficient to operate compared to electric space heaters and they will continue to operate if there is a power failure. The SR10T has a matchless, push-button igniter to light the pilot and it is equipped with a thermostat control. If wall mounting is a problem in the space you are heating, a floor stand for installation is available (sold separately).
  • Test-fired in the factory
  • Oxygen-Depletion Sensor shuts off the unit if there is not enough available fresh air
  • Quiet as a whisper
  • Durable, scratch-resistant finish
Vent-Free Products are intended to be used as a supplemental or secondary heat source. If window condensation problems are common in your home, installing a vent-free heater may not be a good option for you.

 

This appliance may be installed in an aftermarket manufactured (mobile) home, where not prohibited by state or local codes. A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.

Available in Natural Gas SR-10TN and Liquid Propane SR-10TL

$404.10 $359.00
(You save $45.10)
Empire Comfort Systems SR-10T Vent-Free Gas Heater/Thermostat Control
Customer Reviews
FREE SHIPPING ON ALL ORDERS!
Space-saving efficiency and top-mounted controls make the SR-10T an outstanding heater to add radiant heat to your smaller rooms and, when allowed, the SR10T is even ideal for bedrooms. Gas heaters are more cost efficient to operate compared to electric space heaters and they will continue to operate if there is a power failure. The SR10T has a matchless, push-button igniter to light the pilot and it is equipped with a thermostat control. If wall mounting is a problem in the space you are heating, a floor stand for installation is available (sold separately).
  • Test-fired in the factory
  • Oxygen-Depletion Sensor shuts off the unit if there is not enough available fresh air
  • Quiet as a whisper
  • Durable, scratch-resistant finish
Vent-Free Products are intended to be used as a supplemental or secondary heat source. If window condensation problems are common in your home, installing a vent-free heater may not be a good option for you.

 

This appliance may be installed in an aftermarket manufactured (mobile) home, where not prohibited by state or local codes. A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.

Available in Natural Gas SR-10TN and Liquid Propane SR-10TL

  • Heating BTUs:
    10000
  • Control Type:
    Thermostatic
  • Number of Control Settings:
    5
  • Ignition Type:
    Standing Pilot
  • Blower:
    Not Available
  • Floor Stand Kit:
    Optional
  • Wall Mounting Kit:
    Included
  • Gas Connection Size:
    3/8"
  • Flame Type:
    Infrared/Radiant
  • Width (in.):
    11.875
  • Depth (in.):
    6.5
  • Height (in.):
    22
  • Clearance to Side Wall (in.):
    6
  • Clearance Top to Ceiling (in.):
    24
  • Clearance Bottom to Floor:
    2
  • Net Weight (lbs.):
    18
  • Certifications:
    AHRI, Design Certified
  • Parts Warranty:
    5 Years
  • Labor Warranty:
    5 Years