S & P DB24PH1S Downblast Belt Drive Centrifugal Roof Exhauster - 24" Wheel, 115 Volt
S&P DB series Downblast Belt Drive Centrifugal Roof Exhausters are utilized to remove relatively clean air from many commercial and industrial facilities as well as manufacturing and assembly plants, office buildings, schools and other "clean air" structures. Roof mounting gives you the opportunity for shorter duct runs, in for the areas or spaces being exhausted, for more efficient operation. This DB roof exhauster installs into a 30.75" roof opening. Installation should be on a flat, solid surface capable of bearing the weight and vibrations. With higher static pressure capabilities, both ducted and non-ducted installations are available options for the DB line of exhausters.
To help eliminate over-tensioning your BD belt driven exhauster, a factory-installed Automatic Belt Tensioner is available. This allows for easy performance adjustments, when necessary, to balance your system. The 100072 Automatic Belt Tensioner must be ordered at the time of purchase.
Belt driven exhausters also offer lower sound levels and lower RPMs. The DB24PH1S offers 8.6 Sones @ 0.25 Static Pressure with 490 RPMs. If a quiet ventilation fan is your priority, this is the right model for you.
The casing on the S & P DB24PH1S features heavy-duty aluminum construction. The housing includes a bird screen, stainless steel exterior fasteners and a disconnect switch. An easily removable cover allows for quick access to the single speed open drip-proof motor for maintenance.
The DB24PH1S is a size 24 model which means the fan wheel is 24 inches in diameter. With 4,879 CFMs at zero Static Pressure (resistance against air) and a 0.33 horsepower motor, this fan offers operation up to 0.5 static pressure and is rated for non-stop use. DB exhausters with 1/3 to 1/2 horsepower motors are rated for 115 volts, single phase connections. The Downblast Belt Drive Exhausters offer several horsepower options within each fan size. Available fan sizes include 18, 20 and 24 inch models, while horsepower options range from 1/3 hp up to 2 hp.
S&P DB model Belt Drive Downblast Exhausters can be used to replace Greenheck GB, Loren Cook ACEB, Pennbarry DX, Carnes VEBX, Acme PV and Fantech 5BDD models.
S&P Downblast Belt Drive Centrifugal Roof Exhausters have a 5 year warranty. They are also AMCA Certified for Air and Sound Performance as well as cULus 705 Listed.
- Net Weight (lbs.)
- Wheel Size (In.)
- 24 "
- Horsepower (HP)
- Max. BHP
- Max. Static Pressure WG (In.)
- 3/8 "
- Sones Level
- 8.6 @ 1/4 SP
- CFM @ Zero Static Pressure
- Type of Drive
- Belt Drive
- Roof Opening (In.)
- 30.75 "
- AMCA Air and Sound Licensed, UL 705 Listed
- Warranty Detail
- 5 Year Limited Warranty, 1 Year Motor Warranty
Manuals and Guides