S & P DB24TH1S Downblast Belt Drive Centrifugal Roof Exhauster - 24" Wheel, 115/208-230 Volt
S&P DB series Downblast Belt Drive Centrifugal Roof Exhausters are utilized to remove relatively clean air from many commercial and industrial facilities as well as manufacturing and assembly plants, office buildings, schools and other "clean air" buildings. It mounts on the roof which allows it to be near the area being ventilated. With a closer proximity to the ventilating area, shorter duct runs help to create more efficient operation. This DB roof exhauster installs into a 30.75" roof opening. Installation should be on a flat, solid surface capable of bearing the weight and vibrations. With higher static pressure capabilities, both ducted and non-ducted installations are available options for the DB line of exhausters.
Belt drives allow for easy adjustments to balance the system. An automatic belt tensioner is available for DB models up to size 24. The addition of this helps to eliminate the risk of over-tensioning the drive components. The 100072 Automatic Belt Tensioner must be ordered at the time of your roof exhauster and it is factory-installed.
Belt driven exhausters also offer quieter sound levels and lower RPMs. The DB24TH1S offers 22.0 Sones @ 0.25 Static Pressure with 820 RPMs. With it's quiet operation, the DB ventilation system is a great choice.
The casing on the S & P DB24TH1S features heavy-gauge aluminum construction. An included bird screen will help to protect the fan. It also includes a stainless steel exterior fasteners and a disconnect switch. An easily removable cover allows for quick access to the single speed open drip-proof motor for maintenance.
The DB24TH1S is a size 24 model which means the fan wheel is 24 inches in diameter. With 8,164 CFMs at zero Static Pressure (resistance against air) and a 1.50 horsepower motor, this fan offers operation up to 0.5 static pressure and is rated for continuous use. Tri-voltage (115-208-230) is standard on all .75 through 1.5 horsepower, single phase motors. The Downblast Belt Drive Exhausters offer several hp options within each fan size. Available fan sizes include 18, 20 and 24 inch models, while horsepower options range from 1/3 hp up to 2 hp.
Use this model to replace Greenheck GB, Loren Cook ACEB, Pennbarry DX, Carnes VEBX, Acme PV and Fantech 5BDD models.
Soler & Palau DB Series Exhausters carry a 5 year warranty and are AMCA Certified for Air and Sound Performance and cULus 705 Listed.
- Net Weight (lbs.)
- Wheel Size (In.)
- 24 "
- Horsepower (HP)
- 1 1/2
- Max. BHP
- Max. Static Pressure WG (In.)
- 1 "
- Sones Level
- 22.0 @ 1/4 SP
- CFM @ Zero Static Pressure
- Type of Drive
- Belt Drive
- Roof Opening (In.)
- 30.75 "
- AMCA Air and Sound Licensed, UL 705 Listed
- Warranty Detail
- 5 Year Limited Warranty, 1 Year Motor Warranty
Manuals and Guides