S & P DB18PH1S Downblast Belt Drive Centrifugal Roof Exhauster - 18" Wheel, 115 Volt
The DB18PH1S is just one item in the line of S&P Downblast Belt Drive Centrifugal Roof Exhausters. DB roof exhausters are used to remove relatively clean air from many types of commercial facilities. These include, but are not limited to, manufacturing and assembly plants, office buildings, schools, bathrooms, garages, general non-grease kitchen areas and other "clean air" facilities. It mounts on the roof which allows it to be near the area being ventilated. With a closer proximity to the ventilating area, shorter duct runs help to create more efficient operation. This DB roof exhauster installs into a 24.75" roof opening. Installation should be on a flat, solid surface capable of bearing the weight and vibrations. The DB line offers higher static pressure capabilities which allows for both ducted or non-ducted installations.
To help eliminate over-tensioning your BD belt driven exhauster, a factory-installed Automatic Belt Tensioner is available. This allows for easy performance adjustments, when necessary, to balance your system. The 100070 Automatic Belt Tensioner must be ordered at the time of purchase.
Belt driven air movers also offer quieter sound levels and lower RPMs. The DB18PH1S offers 10.8 Sones @ 0.25 Static Pressure with 805 RPMs. If a quiet ventilation fan is your priority, this is the right model for you.
The housing on the S & P DB18PH1S features heavy-gauge aluminum construction. The housing includes a bird screen, stainless steel exterior fasteners and a disconnect switch. The cover is easily removed for uncomplicated access to the single-speed, ODP motor for maintenance and service.
The DB18PH1S is a size 18 model which means the fan wheel is 18 inches across. With 3,056 CFMs at zero Static Pressure (resistance against air) and a 0.33 horsepower motor, this fan offers operation up to 0.5 static pressure and is rated for non-stop use. DB exhausters with .33 through .50 horsepower motors are rated for 115 volts, single phase connections. DB Exhausters are available in 18, 20, and 24 inch models. Each model offers several hp options from .33 - 2.0 horsepower.
S&P DB model Belt Drive Downblast Exhausters can be used to replace Greenheck GB, Loren Cook ACEB, Pennbarry DX, Carnes VEBX, Acme PV and Fantech 5BDD models.
S&P Downblast Belt Drive Centrifugal Roof Exhausters have a 5 year warranty. They are also AMCA Certified for Air and Sound Performance as well as cULus 705 Listed.
- Net Weight (lbs.)
- Wheel Size (In.)
- 18 "
- Horsepower (HP)
- Max. BHP
- Max. Static Pressure WG (In.)
- 1/2 "
- Sones Level
- 10.8 @ 1/4 SP
- CFM @ Zero Static Pressure
- Type of Drive
- Belt Drive
- Roof Opening (In.)
- 24.75 "
- AMCA Air and Sound Licensed, UL 705 Listed
- Warranty Detail
- 5 Year Limited Warranty, 1 Year Motor Warranty
Manuals and Guides