Williams Furnace Company 5002A 50,000 BTU Vented Hearth Heater with Fireplace Front

Usually Leaves Warehouse in 3 - 5 Business Days
Sku:
WILLIAMS-FURNACE-5002A
​Conveniently compact at 30 inches wide and highly efficient, this fireplace front, vented hearth heater creates heat as well as a beautiful focal point in any room with access to an exterior wall and a gas line! Operating at a powerful 50,000 BTU/hr, this heater vents to the outside and features a louvered top and front grille for optimal heat circulation throughout any room.
 
Designed for maximum efficiency, low fuel consumption, and quiet operation, this unit is a smart and sustainable solution to all your heating requirements. It is equipped with a matchless pilot ignition for added safety and requires no electricity to operate.
 
All wiring and controls are easily accessible from the front of the unit, including a wall- or cabinet-mounted thermostat that works to prevent excessive temperature swings, for added control as well as added energy/money savings.
 
This console heater can be ordered with or without a factory installed blower. Electricity is required when adding the blower to your unit. A blower increases the circulation of your warm air for better distribution of heat.
  • Burners engineered for quiet ignition and maximum heat efficiency
  • 4" Vent size
  • Louvered-top design and front grille for improved heat circulation
  • Automatic temperature and safety controls
  • Thermostat included, may be wall-mounted or cabinet-mounted
  • Thermostat operates from 50°F to 90°F
  • Must be installed against a wall (minimum 6" clearance to the rear and 6" from side wall) and vented to the outside
  • Read owner's manual before installing/operating
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.
 
No Blower Installed (2102 available as an accessory). This item is available for use with:
  • Natural Gas - 5002522A AND Liquid Propane Gas - 5002521A
FACTORY INSTALLED BLOWER. This item is available for use with:
  • Natural Gas - 5002922A AND Liquid Propane Gas - 5002921A

WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level.

$1,085.00
Pay Over Time with 0% interest!* ?×Disclosure: *Interest will be charged to your account from the transaction posting date at 19.99% APR if purchase balance is not paid in full by the end of the applicable 6 or 12 month promo period. Minimum monthly payment required. If paid in full within 6 to 12 months
Learn More
Williams Furnace Company 5002A 50,000 BTU Vented Hearth Heater with Fireplace Front
Customer Reviews
FREE SHIPPING ON ALL ORDERS!
​Conveniently compact at 30 inches wide and highly efficient, this fireplace front, vented hearth heater creates heat as well as a beautiful focal point in any room with access to an exterior wall and a gas line! Operating at a powerful 50,000 BTU/hr, this heater vents to the outside and features a louvered top and front grille for optimal heat circulation throughout any room.
 
Designed for maximum efficiency, low fuel consumption, and quiet operation, this unit is a smart and sustainable solution to all your heating requirements. It is equipped with a matchless pilot ignition for added safety and requires no electricity to operate.
 
All wiring and controls are easily accessible from the front of the unit, including a wall- or cabinet-mounted thermostat that works to prevent excessive temperature swings, for added control as well as added energy/money savings.
 
This console heater can be ordered with or without a factory installed blower. Electricity is required when adding the blower to your unit. A blower increases the circulation of your warm air for better distribution of heat.
  • Burners engineered for quiet ignition and maximum heat efficiency
  • 4" Vent size
  • Louvered-top design and front grille for improved heat circulation
  • Automatic temperature and safety controls
  • Thermostat included, may be wall-mounted or cabinet-mounted
  • Thermostat operates from 50°F to 90°F
  • Must be installed against a wall (minimum 6" clearance to the rear and 6" from side wall) and vented to the outside
  • Read owner's manual before installing/operating
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.
 
No Blower Installed (2102 available as an accessory). This item is available for use with:
  • Natural Gas - 5002522A AND Liquid Propane Gas - 5002521A
FACTORY INSTALLED BLOWER. This item is available for use with:
  • Natural Gas - 5002922A AND Liquid Propane Gas - 5002921A

WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level.

  • Heating BTUs:
    50000
  • Heating BTUs (Output):
    34500
  • Type of Venting:
    B-Vent
  • Mounting:
    Freestanding
  • Thermal Efficiency:
    69%
  • AFUE Efficiency:
    68%
  • Blower:
    Optional
  • Vent Connection Size (in.):
    4
  • Center of Vent to Floor (in.):
    22.75
  • Gas Connection Size:
    1/2"
  • Ignition Type:
    Standing Pilot
  • Clearance to Rear Wall (in.):
    6
  • Clearance to Side Wall (in.):
    6
  • Clearance Top to Ceiling (in.):
    57
  • Clearance Access Door Side:
    24
  • Width (in.):
    30
  • Depth (in.):
    16
  • Height (in.):
    32.875
  • Net Weight (lbs.):
    117
  • Certifications:
    CSA
  • Parts Warranty:
    1 Year
  • Labor Warranty:
    None
  • Combustion Chamber Warranty:
    10 Year