Williams Furnace Company 5001A 50,000 BTU Vented Hearth Heater with Enclosed Front

Usually Leaves Warehouse in 3 - 5 Business Days
Sku:
WILLIAMS-FURNACE-5001A
The Williams 5001A Vented Hearth heater is 50,000 BTUs of heating power packed into a compact, efficient black enclosed front cabinet with front grille and top louvers for heat circulation throughout the room. It is equipped with a matchless pilot ignition for added safety and requires no electricity to operate. It vents to the outside with a B-Vent installation.
 
All wiring and controls are easily accessible from the front of the unit.
 
An optional blower is available (sold separately) for this console heater. Electricity is required when adding the blower to your unit. A blower increases the circulation of your warm air for better distribution of heat.
  • No electricity required (without blower)
  • 4" Vent size
  • Burners engineered for quiet ignition and maximum heat efficiency
  • Resettable vent switch
  • Convertible gas valves
  • Must be installed against a wall (minimum 6" clearance to the rear and 6" from side wall) and vented to the outside
  • Read owner's manual before installing/operating
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.
 
Please select the type of fuel to be used and other options such as an optional blower, high elevation kit (if you are 2001 ft. or more above sea level), and a thermostat.
  • Natural Gas - 5001522A AND Liquid Propane Gas - 5001521A

WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level. High elevation kits are sold separately. 

$929.00
Pay Over Time with 0% interest!* ?×Disclosure: *Interest will be charged to your account from the transaction posting date at 19.99% APR if purchase balance is not paid in full by the end of the applicable 6 or 12 month promo period. Minimum monthly payment required. If paid in full within 6 to 12 months
Learn More
Williams Furnace Company 5001A 50,000 BTU Vented Hearth Heater with Enclosed Front
Customer Reviews
FREE SHIPPING ON ALL ORDERS!
The Williams 5001A Vented Hearth heater is 50,000 BTUs of heating power packed into a compact, efficient black enclosed front cabinet with front grille and top louvers for heat circulation throughout the room. It is equipped with a matchless pilot ignition for added safety and requires no electricity to operate. It vents to the outside with a B-Vent installation.
 
All wiring and controls are easily accessible from the front of the unit.
 
An optional blower is available (sold separately) for this console heater. Electricity is required when adding the blower to your unit. A blower increases the circulation of your warm air for better distribution of heat.
  • No electricity required (without blower)
  • 4" Vent size
  • Burners engineered for quiet ignition and maximum heat efficiency
  • Resettable vent switch
  • Convertible gas valves
  • Must be installed against a wall (minimum 6" clearance to the rear and 6" from side wall) and vented to the outside
  • Read owner's manual before installing/operating
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.
 
Please select the type of fuel to be used and other options such as an optional blower, high elevation kit (if you are 2001 ft. or more above sea level), and a thermostat.
  • Natural Gas - 5001522A AND Liquid Propane Gas - 5001521A

WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level. High elevation kits are sold separately. 

  • Heating BTUs:
    50000
  • Heating BTUs (Output):
    34500
  • Type of Venting:
    B-Vent
  • Mounting:
    Freestanding
  • Thermal Efficiency:
    69%
  • AFUE Efficiency:
    68%
  • Blower:
    Optional
  • Vent Connection Size (in.):
    4
  • Center of Vent to Floor (in.):
    22.75
  • Gas Connection Size:
    1/2"
  • Ignition Type:
    Standing Pilot
  • Clearance to Rear Wall (in.):
    6
  • Clearance to Side Wall (in.):
    6
  • Clearance Top to Ceiling (in.):
    57
  • Clearance Access Door Side:
    24
  • Width (in.):
    30
  • Depth (in.):
    16
  • Height (in.):
    32.875
  • Net Weight (lbs.):
    103
  • Certifications:
    CSA
  • Parts Warranty:
    1 Year
  • Labor Warranty:
    None
  • Combustion Chamber Warranty:
    10 Year