Shop by Brand > Bradford White Water Heaters > Bradford White Gas Water Heaters > Bradford White RG1D40T6X 40 Gallon, Damper Atmospheric Vent Water Heater, Liquid Propane

Bradford White RG1D40T6X 40 Gallon, Damper Atmospheric Vent Water Heater, Liquid Propane

Bradford White Bradford White
Availability: Usually Leaves Warehouse in 2 - 3 Business Days
Product Code:BRADFORD-RG1D40T6X
Price: $989.00
WHY ADD THIS TO MY ORDER?
Qty
or
Loading Bread...
Free Shipping on all Orders!
  • Description

    The lifespan of a conventional storage hot water heater is between 10 and 15 years. After all those years of service, sediment build-up and corrosion inside the tank can take their toll. Now may be the best time to consider purchasing a new Bradford White hot water heater.

    The Bradford White RG1D40T6X is a 40 gallon, tall, hot water heater. It features a flue damper to help reduce stand-by heat loss. It is a taller tank with a height of 63 3/8" from the Floor to the Flue Connection with a jacket diameter of 18". The RG1D40T6X has 1" Non-CFC foam insulation. It features an input of 38,000 BTUs. This hot water heater has a First Hour Rating or First Hour Delivery of 76 gallons.

    Basically, the First Hour Rating means how much hot water the hot water heater can deliver in an hour of use, starting with a fully heated tank. It does not mean that the hot water will last for one hour. As the cold water enters the tank it is heated, the faster you use your hot water, the faster your water will become tepid and then cold. However, depending on your temperature set point and your household's water use you can calculate how much hot water you need during your busiest hour. As you use the water in the tank, it is continuously being replenished and heated.

    The Energy Factor (EF) is used to determine the energy efficiency of the hot water heater. Recover efficiency, stand-by loss and cycling loss are all included in the energy factor. Typically, the higher the energy factor, the more efficient the water heater. Cost of fuel however, will have an impact on annual operating costs.

    You can calculate your peak hour usage with this simple chart:

    Use

    Average Gallons

    of Hot Water

    per Usage

    Times Used

    During 1 Hour

    Gallons Used

    in 1 Hour

    Shower (10 minutes)

    10

    x

    =

    Bath

    (Standard 60" x 30" x 14")

    15

    x

    =

    Shaving

    (0.05 gallons/minute)

    2

    x

    =

    Hand Dishwashing or

    Food Prep

    (2 gallons/minute)

    4

    x

    =

    Automatic Dishwasher

    6

    x

    =

    Clothes Washer

    7

    x

    =

    Total Peak
    Hour Demand

    =


    An example of a 75 gallon peak demand might look like this:
    • 4 showers (10 x 4 = 40 gallons)
    • 1 bath (15 x 1 = 15 gallons
    • 1 shave (2 x 1 = 2 gallons)
    • 1 meal prep (4 x 1 = 4 gallons)
    • 2 hand dishwashings (4 x 2 = 8 gallons)
    • 1 dishwasher run (6 x 1 = 6 gallons)
    This household would probably want a hot water heater with a first hour rating of between 73 and 77 gallons.

    Another important feature when choosing a hot water heater is the Recovery Rise. A 90° recovery rise for this tank is about 43 minutes. In other words, when your cold water enters the hot water tank, it will take about three quarters of an hour to rise 90° inside the tank. All Bradford White hot water heaters are NAECA Compliant.

    The Bradford White Defender Safety System is designed to be the safest, most reliable flammable vapor ignition resistant system in the industry meeting all the requirements set forth by the American National Standards Institute (ANSI). The Defender Safety System features ScreenLok Technology flame arrestor. The louvered flame arrestor design increases the speed of incoming combustion air and creates a vector effect inside the combustion chamber when flammable vapors are ignited, preventing flames from traveling back through the flame arrestor and outside the water heater. Other features include Resettable thermal switch, virtually maintenance free

    ICON Control System is included on all Bradford White Residential and Light Duty Commercial Water Heaters. Features of the ICON System include:
    • Enhanced Performance includes enhanced First Hour Delivery Ratings and tighter temperature differentials
    • Advanced Temperature Control System - A microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
    • Intelligent Diagnostics with LED light prompts to assist installers
    • Separate Immersed Thermowell - No need to drain the tank when removing or replacing the gas valve
    Hydrojet® Total Performance System: The Hydrojet® Total Performance System is a cold-water inlet tube that was especially engineered to reduce costly sediment buildup and create more thorough mixing of incoming water with stored water. Because of more efficient mixing, extreme temperature differences throughout the tank are greatly reduced. Water Heaters with the Hydrojet Total Performance System don't have to work as hard or as often to maintain a maximum supply of hot water at the desired temperature. They heat water faster and use less energy to do it. And, it’s standard equipment on all Bradford White top connect residential water heaters.

    Vitraglas® The World's Best Enamel Tank Lining: Bradford White water heater tanks are protected from the corrosive effects of hot water by an exclusive enamel lining. The exclusive Vitraglas enamel lining is uniquely formulated and applied to the interior of the water heater tank.

    Our test results prove that Vitraglas provides unsurpassed protection against failure when compared to other water heater linings.
    • Standard Features:
      • Advanced ScreenLok® Technology Flame Arrestor design
      • Resettable thermal switch
      • Pedestal base
      • Factory installed Hydrojet® Total Performance System - Cold water inlet sediment reducing device helps prevent sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up in tank.
      • 3" x 4" Snap-Lock draft diverter allows for either 3" or 4" vent connections
      • T&P relief valve
      • Low restriction brass drain valve
      • 1" non-CFC foam insulation
  • Tech Specs

    Capacity (Gallons)
    40
    Fuel Type
    Liquid Propane (LP)
    BTU Input
    38000
    First Hour Delivery Rating (Gal.)
    76
    Energy Factor (EF)
    0.62
    Includes Heat Pump
    No
    Energy Star
    No
    Venting
    Atmospheric
    Overall Depth (in.)
    22.75 "
    Overall Height (in.)
    63.375 "
    Overall Width (in.)
    18 "
    Net Weight (lbs.)
    134
    Water Connection Size
    3/4" NPT
    Warranty Detail
    6 Year Limited Warranty on Tank and Component Parts
  • Manuals and Guides

  • More Info

    • Dimensions:
      • A - Floor to Flue Connection: 63 3/8"
      • B - Jacket Dimensions: 18"
      • C - Vent Size: 3" x 4"
      • D - Floor to T&P Connection: 50 1/8"
      • E - Floor to Gas Connection: 13"
      • F - Floor to Top of Heater: 56 9/16"
      • G - Floor to Water Connection: 57 3/4"
      • H - Depth: 22 3/4"
      • J - C/L of Water Connection: 8"