Goodman CAPF4961D6 4.0 to 5.0 Ton Indoor Evaporator Coil

Usually Leaves Warehouse in 2 - 3 Business Days
Sku:
GOODMAN-CAPF4961D6

The CAPF4961D6 evaporator coil is used in conjunction with a furnace and split air conditioner or heat pump system. The Goodman CAPF series evaporator coils are cased coils and feature a flowrater valve. A flowrater valve has a fixed orifice which delivers a set amount of refrigerant to the coil, regardless of conditions. Featured on all Goodman coils is the all-aluminum tube and fin coil construction. The use of single metal construction and a grooved tube help to provide the maximum in heat transfer efficiency. Aluminum is also used to help combat potential corrosion.

Goodman coils match other components like furnaces with their galvanized leather grain-embossed finish. Foil-faced insulation covers the casing inside to reduce cabinet moisture. A split seam is located on the front of the cabinet for easy access. Thermoplastic drain pans resist rust and the detrimental effects of UV rays. They are constructed of DecaBDE-free thermoplastic and have a shallow design.

The CAPF series of evaporator coils can be connected for use in an upflow or downflow application. In an upflow installation you can take advantage of the natural flow the heat. In this type of setup, cold air enters at the bottom and hot air is exhausted out the top. The opposite is true in a downflow installation. Usually installed in attics, this installation takes cooler air into the top of the unit and released out the bottom or downward into the space. The CAPF evaporator coils utilize either R410A or the newer R22 refrigerants.

  • Nominal Cooling Tons: 4.0 - 5.0
  • Service Valve Liquid Connection Size: 3/8"
  • Service Valve Suction Connection Size: 7/8"
  • Nominal Width for Gas Furnace: 24.5"
  • Plenum Width: 23.5"
  • Dimensions: 24.5"w x 21.0"d x 30.0"h

 

The 21" deep cabinet is engineered to make installing the evaporator coil in an attic easy.. evaporator coil can be purchased by anyone, however, HVAC systems must be installed by a certified HVAC technician. An HVAC contractor will have the experience required to make sure your new system is up and running properly.

Goodman evaporator coils are designed and assembled in the USA. Coils include a 10 year limited parts warranty. They are also AHRI Certified and ETL Listed.


Looking for a qualified installer? Allow Preferred Contractor to help. Preferred Contractor has a nationwide network of trained air conditioner installers. Click here to fill out the form and get started. An HVAC expert will contact you to learn about your needs and get a quote for you whether you have already purchased the equipment or are just starting to research.

$501.00
Goodman CAPF4961D6 4.0 to 5.0 Ton Indoor Evaporator Coil
Customer Reviews
FREE SHIPPING ON ALL ORDERS!

The CAPF4961D6 evaporator coil is used in conjunction with a furnace and split air conditioner or heat pump system. The Goodman CAPF series evaporator coils are cased coils and feature a flowrater valve. A flowrater valve has a fixed orifice which delivers a set amount of refrigerant to the coil, regardless of conditions. Featured on all Goodman coils is the all-aluminum tube and fin coil construction. The use of single metal construction and a grooved tube help to provide the maximum in heat transfer efficiency. Aluminum is also used to help combat potential corrosion.

Goodman coils match other components like furnaces with their galvanized leather grain-embossed finish. Foil-faced insulation covers the casing inside to reduce cabinet moisture. A split seam is located on the front of the cabinet for easy access. Thermoplastic drain pans resist rust and the detrimental effects of UV rays. They are constructed of DecaBDE-free thermoplastic and have a shallow design.

The CAPF series of evaporator coils can be connected for use in an upflow or downflow application. In an upflow installation you can take advantage of the natural flow the heat. In this type of setup, cold air enters at the bottom and hot air is exhausted out the top. The opposite is true in a downflow installation. Usually installed in attics, this installation takes cooler air into the top of the unit and released out the bottom or downward into the space. The CAPF evaporator coils utilize either R410A or the newer R22 refrigerants.

  • Nominal Cooling Tons: 4.0 - 5.0
  • Service Valve Liquid Connection Size: 3/8"
  • Service Valve Suction Connection Size: 7/8"
  • Nominal Width for Gas Furnace: 24.5"
  • Plenum Width: 23.5"
  • Dimensions: 24.5"w x 21.0"d x 30.0"h

 

The 21" deep cabinet is engineered to make installing the evaporator coil in an attic easy.. evaporator coil can be purchased by anyone, however, HVAC systems must be installed by a certified HVAC technician. An HVAC contractor will have the experience required to make sure your new system is up and running properly.

Goodman evaporator coils are designed and assembled in the USA. Coils include a 10 year limited parts warranty. They are also AHRI Certified and ETL Listed.


Looking for a qualified installer? Allow Preferred Contractor to help. Preferred Contractor has a nationwide network of trained air conditioner installers. Click here to fill out the form and get started. An HVAC expert will contact you to learn about your needs and get a quote for you whether you have already purchased the equipment or are just starting to research.

  • Cooling Capacity (Tonnage):
    5 Tons
  • Plenum Opening - Width (in.):
    23.5
  • Nominal Furnace Width (in.):
    24.5
  • TXV Installed:
    No
  • Installation Type:
    Upflow or Downflow
  • Service Valve Liquid (in.):
    3/8
  • Service Valve Suction (in.):
    7/8
  • Height (in.):
    30
  • Width (in.):
    24.5
  • Depth (in.):
    21
  • Certifications:
    AHRI Certified; ETL Listed
  • Parts Warranty:
    10 Years