Goodman CHPF4860D6 4 to 5 Ton Indoor Evaporator Coil
The CHPF4860D6 evaporator coil is used in combination with a furnace and split air conditioner or heat pump system. The Goodman CHPF series units are cased coils and feature a flowrater valve. This type of valve has a fixed orifice and is designed to deliver a fixed amount of refrigerant to the coil, regardless of conditions. All Goodman coil feature an all-aluminum tube and fin coil construction. The use of single metal construction and a grooved tube help to provide the utmost in heat transfer efficiency. Aluminum is also used to help resist potential corrosion.
Goodman coils match other components like furnaces with their galvanized leather grain-embossed finish. Each unit features foil-faced insulation on the interior of the casing to reduce cabinet condensation. A split seam is located on the front of the cabinet for easy access. Thermoplastic drain pans resist rust and the fading effects of UV rays. They are constructed of DecaBDE-free thermoplastic and have a shallow design.
The CHPF series of evaporator coils can be installed for use in a horizontal configuration. A horizontal flow installation takes the air in on one side and exhausts it out the other. This type of unit can be installed anywhere - upstairs or downstairs since the air moves laterally. The CHPF evaporator coils utilize either R410A or R22 refrigerants.
- Nominal Cooling Tons: 4.0 - 5.0
- Service Valve Liquid Connection Size: 3/8"
- Service Valve Suction Connection Size: 7/8"
- Nominal Width for Gas Furnace: 24.5"
- Plenum Width: 19.0"; Plenum Depth: 23.5"
- Dimensions: 21.125"d x 26.0"w x 24.5"h
The evaporator coil cabinet is 21 1/8" deep to allow for easy attic installation. Professional installation by an HVAC contractor is required. An HVAC contractor will have the knowledge and tools required to make sure your new system is up and running properly.
Like all Goodman equipment, evaporator coils are designed, engineered, and built in the USA and built to last. They include a 10 year parts limited warranty and are AHRI Certified and ETL Listed.
Looking for a qualified installer? Allow Preferred Contractor to help. Preferred Contractor has a nationwide network of trained air conditioner installers. Click here to fill out the form and get started. An HVAC expert will contact you to learn about your needs and get a quote for you whether you have already purchased the equipment or are just starting to research.
- Net Weight (lbs.)
- Cooling Capacity (Tonnage)
- 5 Tons
- Plenum Opening - Width (in.)
- 19 "
- Plenum Opening - Depth (in.)
- 23.5 "
- Nominal Furnace Width (in.)
- 24.5 "
- TXV Installed
- Installation Type
- Service Valve Liquid (in.)
- 3/8 "
- Service Valve Suction (in.)
- 7/8 "
- Height (in.)
- 24.5 "
- Width (in.)
- 26 "
- Depth (in.)
- 21.125 "
- AHRI Certified; ETL Listed
- Parts Warranty
- 10 Years
Manuals and Guides