Base Price shown is for FIREBOX with COTTAGE CLAY LINER ONLY. A Burner and Log Set are required. A Blower Fan is also available but not required! The price displayed will update based on your selections. If you need help designing your firebox, please contact us.
Maximize the heat in your room with a GCUF32C-F vent free, circulating firebox. It offers a louvered front and includes Cottage Clay firebrick liner. It offers a beautiful 29-7/8" wide viewing area. With a log set (sold separately) of your choice, you will warm up quickly. No chimney is required for a vent free fireplace and since it is also a zero clearance firebox, it can be installed flush against virtually any surface including drywall or wood. Plus this also gives you the flexibility of installing on an interior or exterior wall!
With a vent free firebox, fresh air is drawn in at the bottom of the firebox, and warmed air is expelled into the room from the top. The GCUF firebox features an angled top design to help direct the warm air out for maximum efficiency. A blower (BLOTMC) can be added to help circulate the warm air.
The GCUF firebox can accept most 18" vent free log sets and burners (sold separately). Some 24" log sets and burners may be acceptable as well. Please confirm all minimum dimensions required for specific burners and log sets. With zero clearance, the firebox can be installed flush against any surface like drywall or wood.
The GCUF32CF firebox offers a louvered face and a large 29-7/8" x 21-3/4" viewing area. Included with the firebox is a black hood.
Minimum hearth dimensions required for the GCUF32CF are:
- 29-7/8" Front Width
- 21-7/8" Front Height
- 23-3/8" Rear Width
- 18" Rear Height
- 13-1/4" Deep
Framing dimensions are 37-1/4"w x 35"h x 15-1/2"d.
The actual size of the GCUF32C-F firebox is:
- 37" Front Width
- 29" Rear Width
- 34-3/4" Height
- 16" Deep
The GCUF32C-F will accept Monessen 18" Log Sets (sold separately). Below are the Monessen Log Set options available for this firebox. With zero clearance, the firebox can be installed flush against any surface like drywall or wood. Vent Free Natural Blaze Burners are available for use with each of these log sets:
Additionally, Monessen offers Natural Blaze burners with Natural Blaze Technology. This technology helps provide taller, more lively flames for a truly realistic fire in your vent-free firebox. Beautiful yellow flames are instantly achieved every time your burner is switched on. Available burners for the 32" firebox include:
- Millivolt Valve (NB18PV, NB18NV) - standing pilot with on/off switch and manual variable flame height control and remote ready (remote sold separately)
- Electronic Ignition with Signature Command System (NB18PSCR, NB18NSCR) - intermittent pilot/electronic ignition, 3 step flame adjustment and Touch Screen Thermostat Remote included.
With a vent free firebox, fresh air is drawn in at the bottom of the firebox, and warmed air is expelled into the room from the top. The Monessen fireboxes feature an angled top design to help direct the warm air out for maximum efficiency. A blower (BLOTMC) can be added to help circulate the warm air.
An optional outside air kit is also available for vent free fireboxes. The AK4 introduces fresh, outside air into the firebox. An outside air kit is recommended as an accessory when installing a vent free appliance into newer, more air tight construction for an adequate supply of fresh air. Some local building codes may require an outside air kit.
A log set and burner are required. Check out our selection of available log sets.
While there are no decorative pieces required for this firebox, several mantel cabinets are available (sold separately) to help customize your fireplace look.
- Size (in.):
- Type of Venting:
- Vent Free
- Installation Type:
- Location of Use:
- Width (in.):
- Depth (in.):
- Height (in.):
- Framing Width (in.):
- Framing Depth (in.):
- Framing Height (in.):
- Parts Warranty:
- Labor Warranty:
Limited Lifetime Warranty to original owner, subject to proof of purchase. Warranty covers firebox, combustion chamber, heat exchanger, grate and stainless steel burners.