White Mountain Hearth VFSM-30N 30" Manual Valve Vented/Vent Free Slope Glaze Burner - Natural Gas

Sku:
EMPIRE-VFSM30N
Usually Leaves Warehouse in 2 - 3 Business Days
$929.00
The 30" Slope Glaze burner can be used in a vented or vent-free installation. This Vented/Vent-Free Burner includes an Oxygen Depletion System to quickly shut off the gas if room oxygen levels drop to unsafe levels. Vented/Vent-Free burners can be converted for use in a vented application by opening the fireplace damper.

The Slope Glaze Burner features concealed controls and include a standing pilot for instant starts. It is low in the front and slopes up in the rear to help raise the logs. This burner is manual control - it will not operate with a remote or a thermostat. It includes a 3 position manual knob on the burner, inside the firebox. All White Mountain Hearth burners include a standing pilot for instant starts. All you need is the log set. So toss out the matches, turn on the valve and curl up by the warm fire for a comfy night at home!
  • Vented/Vent Free
  • Approved for use in any certified vent-free firebox
  • May be installed in an existing wood-burning fireplace, with the damper closed, to operate as a vent-free heating system
  • Can be used with Birch, Charred Oak, or Super Charred Oak Ceramic Fiber Log Sets
  • Can be used with Stacked Aged Oak, Sassafras, Super Sassafras, or Ponderosa Refractory Log Sets
Also certified for installation as vented log set, so long as the installer blocks the fireplace damper partially open. A special flue-damper clamp is included with burner. When used as a vented burner, it is only rated as a decorative system and is not for use as a heater.
 
This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.
 
A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.

*An additional main burner orifice is provided in instruction package envelope to reduce input of the vented burner assembly.

  • Regular Pressure Setting: 6.0" W.C.
  • Gas Inlet Pressure Max: 10.5" W.C.
  • Gas Inlet Pressure Min: 7.0" W.C.
FREE SHIPPING ON ALL ORDERS!
White Mountain Hearth VFSM-30N 30" Manual Valve Vented/Vent Free Slope Glaze Burner - Natural Gas
  • White Mountain Hearth VFSM-30N 30" Manual Valve Vented/Vent Free Slope Glaze Burner - Natural Gas
  • White Mountain Hearth VFSM-30N 30" Manual Valve Vented/Vent Free Slope Glaze Burner - Natural Gas

Product Overview

The 30" Slope Glaze burner can be used in a vented or vent-free installation. This Vented/Vent-Free Burner includes an Oxygen Depletion System to quickly shut off the gas if room oxygen levels drop to unsafe levels. Vented/Vent-Free burners can be converted for use in a vented application by opening the fireplace damper.

The Slope Glaze Burner features concealed controls and include a standing pilot for instant starts. It is low in the front and slopes up in the rear to help raise the logs. This burner is manual control - it will not operate with a remote or a thermostat. It includes a 3 position manual knob on the burner, inside the firebox. All White Mountain Hearth burners include a standing pilot for instant starts. All you need is the log set. So toss out the matches, turn on the valve and curl up by the warm fire for a comfy night at home!
  • Vented/Vent Free
  • Approved for use in any certified vent-free firebox
  • May be installed in an existing wood-burning fireplace, with the damper closed, to operate as a vent-free heating system
  • Can be used with Birch, Charred Oak, or Super Charred Oak Ceramic Fiber Log Sets
  • Can be used with Stacked Aged Oak, Sassafras, Super Sassafras, or Ponderosa Refractory Log Sets
Also certified for installation as vented log set, so long as the installer blocks the fireplace damper partially open. A special flue-damper clamp is included with burner. When used as a vented burner, it is only rated as a decorative system and is not for use as a heater.
 
This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.
 
A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.

*An additional main burner orifice is provided in instruction package envelope to reduce input of the vented burner assembly.

  • Regular Pressure Setting: 6.0" W.C.
  • Gas Inlet Pressure Max: 10.5" W.C.
  • Gas Inlet Pressure Min: 7.0" W.C.

Tech Specs

General Features

Fireplace Style:
Single Sided
Location of Use:
Indoor
Type of Venting:
Vented/Vent Free
Media Style:
Traditional Log Set
Type of Grate:
Standard
Fuel Type:
Natural Gas (NG)
Allowable Log Set Sizes (in.):
30"
Location of Use:
Mobile Home Approved

Performance

BTUs (Max.):
38000
Ignition Type:
Manual (No Remote)
Remote:
Not Available

Gas Requirements

Gas Connection Size (in.):
1/2"
Manifold Pressure (in.):
6.0" w.c.
Inlet Gas Pressure (Min.):
7.0" w.c.
Inlet Gas Pressure (Max.):
10.5" w.c.

Minimum Fireplace Requirements

Requirements for 30" Logs

Req. Min. Front Width (in.):
34"
Req. Min. Rear Width (in.):
27"
Req. Min. Depth (in.):
14"
Req. Min. Height (in.):
18"
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov