Fireplaces & Stoves > Gas Logs > Burners Only > White Mountain Hearth VSM-24N 24" Manual Valve Vented Slope Glaze Burner - Natural Gas

White Mountain Hearth VSM-24N 24" Manual Valve Vented Slope Glaze Burner - Natural Gas

White Mountain Hearth White Mountain Hearth
Availability: Usually Leaves Warehouse in 2 - 3 Business Days
Product Code:EMPIRE-VSM24N
Price: $468.90
Qty
or
Loading Bread...
Free Shipping on all Orders!
  • Description

    If you are only looking for a decorative, non-heat source with more realistic fire, then a Slope Glaze Vented Burner is what you need for your vented log set. The main advantage of a vented burner is a realistic yellow flame which is created by the open flue. Unfortunately, to get the more realistic fire-look, the heat goes up the chimney as well.

    A Slope Glaze burner sits low in the firebox in the front and is slightly angled up towards the rear. It is certified for use in an existing fireplace with an open damper flue. Vented systems do not burn the gas used cleanly and therefore need to be exhausted through an open chimney - similar to burning wood. This burner is for vented use only - it is not convertible to vent-free operation. While a vented burner can be rated up to 75,000 BTUs, the BTUs are used to create taller flames but is still only rated as a decorative system. It is not for use as a heat source and cannot be operated by a thermostat. A vented burner is only available in a manual model and a millivolt model.

    This is a manual model. It includes a 3 position control knob that is concealed inside the firebox. The BTU input range is from 50000 (reduced*) - 75000.
    • Vented
    • This log set is to be installed only in a solid-fuel burning fireplace with a working flue constructed of non-combustible material. The vent damper must also have a damper clamp attached to it to keep the damper from accidentally closing during operation.
    • Certified for installation as vented log set ONLY. The installer must block the fireplace damper partially open. A special flue-damper clamp is included with burner.
    • This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.
    A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.

    *An additional main burner orifice is provided in instruction package envelope to reduce input of the vented burner assembly.

  • Tech Specs

    Type of Venting
    Vented
    Fuel Type
    Natural Gas (NG)
    Valve Type/Ignition
    Manual with Safety Pilot
    Remote
    Not Available
    Fireplace Style
    Single Sided
    Type of Grate
    Standard
    Burner Use
    Log Set
    Allowable Log Set Sizes (in.)
    24 "
    BTUs (Min./Max.)
    50000* / 75000
    Location of Use
    Indoor
    Mobil Home Approved
    Req. Min. Front Width (in.)
    34 "
    Req. Min. Rear Width (in.)
    27 "
    Req. Min. Depth (in.)
    15 "
    Req. Min. Height (in.)
    22 "
    Net Weight (lbs.)
    30
    Additional Features
  • Regular Pressure Setting: 3.5" W.C.
  • Gas Inlet Pressure Max: 10.5" W.C.
  • Gas Inlet Pressure Min: 4.5" W.C.
  • *An additional main burner orifice is provided in instruction package envelope to reduce input of the vented burner assembly.
  • Manuals and Guides