Goodman CHPF3743C6 3.0 to 3.5 Ton Indoor Evaporator Coil
Evaporator coils are used in combination with split air conditioner systems - with or without heat pumps. The Goodman CHPF series coils are cased coils and feature a flowrater valve. This type of valve has a fixed orifice and is constructed to deliver a fixed amount of refrigerant to the coil, regardless of conditions. Included on all Goodman coils is the all-aluminum tube and fin coil construction. Goodman uses a single metal, aluminum, and a grooved tube help to give the maximum in heat transfer efficiency. Aluminum construction helps to withstand potential corrosion.
Goodman coils match other components like furnaces with their galvanized leather grain-embossed finish. Foil-faced insulation covers the casing inside to reduce cabinet moisture. A split seam is located on the front of the cabinet for easy access. Drain pans feature a low water-retention design and are made of DecaBDE-free thermoplastic. The thermoplastic design resists rust and is UV-resistant.
The CHPF series of evaporator coils can be connected for use in a horizontal configuration. A horizontal flow installation takes the air in on one side and exhausts it out the other. This type of unit can be installed anywhere - upstairs or downstairs since the air moves laterally. The CHPF3743C6 evaporator coils requires either R410A or R22 refrigerants.
- Nominal Cooling Tons: 3.0 - 3.5
- Service Valve Liquid Connection Size: 3/8"
- Service Valve Suction Connection Size: 7/8"
- Nominal Width for Gas Furnace: 21.0"
- Plenum Width: 19.0"; Plenum Depth: 20.0"
- Dimensions: 21.125"d x 26.0"w x 21.0"h
The unit cabinet is 21 1/8" deep for easier attic access. Professional installation by an HVAC installer is required. An HVAC technician will have the knowledge and tools required to make sure your new system is up and running properly.
All Goodman products including evaporator coils are built in America. They carry a 10 year parts limited warranty and are AHRI Certified and ETL Listed.
Looking for a qualified installer? Allow Preferred Contractor to help. Preferred Contractor has a nationwide network of trained air conditioner installers. Click here to fill out the form and get started. An HVAC expert will contact you to learn about your needs and get a quote for you whether you have already purchased the equipment or are just starting to research.
- Net Weight (lbs.)
- Cooling Capacity (Tonnage)
- 3 1/2 Tons
- Plenum Opening - Width (in.)
- 19 "
- Plenum Opening - Depth (in.)
- 20 "
- Nominal Furnace Width (in.)
- 21 "
- TXV Installed
- Installation Type
- Service Valve Liquid (in.)
- 3/8 "
- Service Valve Suction (in.)
- 7/8 "
- Height (in.)
- 21 "
- Width (in.)
- 26 "
- Depth (in.)
- 21.125 "
- AHRI Certified; ETL Listed
- Parts Warranty
- 10 Years
Manuals and Guides