Goodman CHPF3642C6 3 to 3.5 Ton Indoor Evaporator Coil
Evaporator coils are used in combination with split AC systems - with or without heat pumps. The Goodman CHPF series units are cased coils and feature a flowrater valve. This type of valve has a fixed orifice and is constructed to deliver a fixed amount of refrigerant to the coil, regardless of conditions. Featured on all Goodman coils is the all-aluminum tube and fin coil construction. Goodman uses a single metal, aluminum, and a grooved tube help to provide the most in heat transfer efficiency. Aluminum construction helps to withstand potential corrosion.
Goodman coils match other components like furnaces with their galvanized leather grain-embossed finish. Each unit features foil-faced insulation on the interior of the casing to reduce cabinet condensate. The front of the cabinet has a split seam for easy access. Thermoplastic drain pans resist rust and the detrimental effects of UV rays. They are constructed of DecaBDE-free thermoplastic and have a low water-retention design.
The CHPF series of evaporator coils can be connected for use in a horizontal configuration. A horizontal flow installation takes the air in on one side and exhausts it out the other. This type of unit can be installed anywhere - upstairs or downstairs since the air moves laterally. The CHPF3642C6 evaporator coil is compatible with either R410A refrigerant and the newer R22 refrigerant.
- Nominal Cooling Tons: 3.0 - 3.5
- Service Valve Liquid Connection Size: 3/8"
- Service Valve Suction Connection Size: 7/8"
- Nominal Width for Gas Furnace: 21.0"
- Plenum Width: 19.0"; Plenum Depth: 20.0"
- Dimensions: 21.125"d x 26.0"w x 21.0"h
The 21 1/8" deep cabinet is engineered to make installing the evaporator coil in an attic easy.. This unit can be purchased by anyone, however, HVAC systems must be installed by a certified HVAC technician. An HVAC installer will have the skills required to ensure that your system functions to its highest ability.
All Goodman products including evaporator coils are built in America. Coils have a 10 year limited parts warranty. They are also AHRI Certified and ETL Listed.
Looking for a qualified installer? Allow Preferred Contractor to help. Preferred Contractor has a nationwide network of trained air conditioner installers. Click here to fill out the form and get started. An HVAC expert will contact you to learn about your needs and get a quote for you whether you have already purchased the equipment or are just starting to research.
- Net Weight (lbs.)
- Cooling Capacity (Tonnage)
- 3 1/2 Tons
- Plenum Opening - Width (in.)
- 19 "
- Plenum Opening - Depth (in.)
- 20 "
- Nominal Furnace Width (in.)
- 21 "
- TXV Installed
- Installation Type
- Service Valve Liquid (in.)
- 3/8 "
- Service Valve Suction (in.)
- 7/8 "
- Height (in.)
- 21 "
- Width (in.)
- 26 "
- Depth (in.)
- 21.125 "
- AHRI Certified; ETL Listed
- Parts Warranty
- 10 Years
Manuals and Guides