Goodman CHPF2430B6 2 to 2.5 Ton Indoor Evaporator Coil
Evaporator coils are used in conjunction with split air conditioner systems - with or without heat pumps. The Goodman CHPF series units are cased coils and feature a flowrater valve. A flowrater valve has a fixed orifice which delivers a set amount of refrigerant to the coil, regardless of conditions. All Goodman coil feature an all-aluminum tube and fin coil design. The use of single metal construction and a grooved tube help to provide the utmost in heat transfer efficiency. Aluminum is also used to help resist potential corrosion.
The cabinet is finished in the same galvanized, leather grain-embossed finish as other Goodman system components. Foil-faced insulation covers the casing inside to reduce cabinet moisture. A split seam is located on the front of the cabinet for easy access. Thermoplastic drain pans resist rust and the fading effects of UV rays. They are constructed of DecaBDE-free thermoplastic and have a low water-retention design.
The CHPF series of evaporator coils can be installed for use in a horizontal configuration. A horizontal flow installation takes the air in on one side and exhausts it out the other. This type of unit can be installed anywhere - upstairs or downstairs since the air moves laterally. The CHPF2430B6 evaporator coil uses either R22 or R410A refrigerants.
- Nominal Cooling Tons: 2.0 - 2.5
- Service Valve Liquid Connection Size: 3/8"
- Service Valve Suction Connection Size: 3/4"
- Nominal Width for Gas Furnace: 17.5"
- Plenum Width: 19.0"; Plenum Depth: 16.5"
- Dimensions: 21.125"d x 26.0"w x 17.5"h
The 21 1/8" deep cabinet is engineered to make installing the evaporator coil in an attic easy.. Professional installation by an HVAC installer is required. An HVAC technician will have the knowledge and tools required to make sure your new system is up and running properly.
Goodman evaporator coils are designed and assembled in the USA. They have a 10 year parts limited warranty and are AHRI Certified and ETL Listed.
Looking for a qualified installer? Allow Preferred Contractor to help. Preferred Contractor has a nationwide network of trained air conditioner installers. Click here to fill out the form and get started. An HVAC expert will contact you to learn about your needs and get a quote for you whether you have already purchased the equipment or are just starting to research.
- Net Weight (lbs.)
- Cooling Capacity (Tonnage)
- 2 1/2 Tons
- Plenum Opening - Width (in.)
- 19 "
- Plenum Opening - Depth (in.)
- 16.5 "
- Nominal Furnace Width (in.)
- 17.5 "
- TXV Installed
- Installation Type
- Service Valve Liquid (in.)
- 3/8 "
- Service Valve Suction (in.)
- 3/4 "
- Height (in.)
- 17.5 "
- Width (in.)
- 26 "
- Depth (in.)
- 21.125 "
- AHRI Certified; ETL Listed
- Parts Warranty
- 10 Years
Manuals and Guides