Goodman CAPF3131C6 2.5 Ton Indoor Cased Evaporator Coil - Fits 21" Wide Furnace

Usually Leaves Warehouse in 2 - 3 Business Days
Sku:
GOODMAN-CAPF3131C6

The CAPF3131C6 evaporator coil is used in combination with a furnace and split air conditioner or heat pump system. The Goodman CAPF series coils are cased coils and feature a flowrater valve. This type of valve has a fixed orifice and is constructed to deliver a fixed amount of refrigerant to the coil, regardless of conditions. Evaporator coils are for use split system air conditioner condensers as well as heat pump systems. The CAPF3131C6, can be used with 30,000 (2.5 ton) systems. 

All Goodman coils feature an all-aluminum tube and fin coil design. Goodman uses a single metal, aluminum, and a grooved tube help to deliver the utmost in heat transfer efficiency. Aluminum construction helps to hinder potential corrosion. Like other Goodman products, the cabinet has a galvanized leather grain-embossed finish. Foil-faced insulation covers the casing inside to reduce cabinet condensate. A split seam is located on the front of the cabinet for easy access. Drain pans feature a low water-retention design and are made of DecaBDE-free thermoplastic. The thermoplastic design resists rust and is UV-resistant.

The CAPF series of evaporator coils can be connected for use in an upflow or downflow application. In an upflow installation you can take advantage of the natural flow the heat. In this type of installation, cold air enters at the bottom and hot air is exhausted out the top. The opposite is true in a downflow installation. Usually installed in attics, this installation takes cooler air into the top of the unit and released out the bottom or downward into the space. The CAPF evaporator coils require R410A or the newer R22 refrigerant.

  • Nominal Cooling Tons: 2.5
  • Service Valve Liquid Connection Size: 3/8"
  • Service Valve Suction Connection Size: 7/8"
  • Nominal Width for Gas Furnace: 21.0"
  • Plenum Width: 20.0"
  • Dimensions: 21.0"w x 21.125"d x 22.0"h

Cased evaporator coils are typically used for new comfort system installations including a new furnace. They must be paired with the condenser unit in a split system - with or without a heat pump, as well as match the furnace for a proper/exact fit. Uncased coils are typically used in replacement installations in which you are inserting the coil into pre-existing ductwork. 

The 21" deep cabinet is engineered to make installing the evaporator coil in an attic easy. Professional installation by an HVAC contractor is required. An HVAC tech will have the experience required to ensure that your system functions to its highest ability.

Like all Goodman products, evaporator coils are built in America and built to last. They include a 10 year parts limited warranty and are AHRI Certified and ETL Listed.

$369.00
Pay Over Time with 0% interest!* ?×Disclosure: *Interest will be charged to your account from the transaction posting date at 19.99% APR if purchase balance is not paid in full by the end of the applicable 6 or 12 month promo period. Minimum monthly payment required. If paid in full within 6 to 12 months
Learn More
Goodman CAPF3131C6 2.5 Ton Indoor Evaporator Coil
Customer Reviews
FREE SHIPPING ON ALL ORDERS!

The CAPF3131C6 evaporator coil is used in combination with a furnace and split air conditioner or heat pump system. The Goodman CAPF series coils are cased coils and feature a flowrater valve. This type of valve has a fixed orifice and is constructed to deliver a fixed amount of refrigerant to the coil, regardless of conditions. Evaporator coils are for use split system air conditioner condensers as well as heat pump systems. The CAPF3131C6, can be used with 30,000 (2.5 ton) systems. 

All Goodman coils feature an all-aluminum tube and fin coil design. Goodman uses a single metal, aluminum, and a grooved tube help to deliver the utmost in heat transfer efficiency. Aluminum construction helps to hinder potential corrosion. Like other Goodman products, the cabinet has a galvanized leather grain-embossed finish. Foil-faced insulation covers the casing inside to reduce cabinet condensate. A split seam is located on the front of the cabinet for easy access. Drain pans feature a low water-retention design and are made of DecaBDE-free thermoplastic. The thermoplastic design resists rust and is UV-resistant.

The CAPF series of evaporator coils can be connected for use in an upflow or downflow application. In an upflow installation you can take advantage of the natural flow the heat. In this type of installation, cold air enters at the bottom and hot air is exhausted out the top. The opposite is true in a downflow installation. Usually installed in attics, this installation takes cooler air into the top of the unit and released out the bottom or downward into the space. The CAPF evaporator coils require R410A or the newer R22 refrigerant.

  • Nominal Cooling Tons: 2.5
  • Service Valve Liquid Connection Size: 3/8"
  • Service Valve Suction Connection Size: 7/8"
  • Nominal Width for Gas Furnace: 21.0"
  • Plenum Width: 20.0"
  • Dimensions: 21.0"w x 21.125"d x 22.0"h

Cased evaporator coils are typically used for new comfort system installations including a new furnace. They must be paired with the condenser unit in a split system - with or without a heat pump, as well as match the furnace for a proper/exact fit. Uncased coils are typically used in replacement installations in which you are inserting the coil into pre-existing ductwork. 

The 21" deep cabinet is engineered to make installing the evaporator coil in an attic easy. Professional installation by an HVAC contractor is required. An HVAC tech will have the experience required to ensure that your system functions to its highest ability.

Like all Goodman products, evaporator coils are built in America and built to last. They include a 10 year parts limited warranty and are AHRI Certified and ETL Listed.

  • Cooling Capacity (Tonnage):
    2.5 Tons
  • Plenum Opening - Width (in.):
    20
  • Nominal Furnace Width (in.):
    21
  • TXV Installed:
    No
  • Installation Type:
    Upflow or Downflow
  • Casing:
    Cased
  • Service Valve Liquid (in.):
    3/8
  • Service Valve Suction (in.):
    7/8
  • Height (in.):
    22
  • Width (in.):
    21
  • Depth (in.):
    21.125
  • Certifications:
    AHRI Certified; ETL Listed
  • Parts Warranty:
    10 Years