Heating > Gas Heat > Vent Free Heaters > Empire Comfort Systems SR-10T Vent-Free Gas Heater/Thermostat Control

Empire Comfort Systems SR-10T Vent-Free Gas Heater/Thermostat Control

Empire Comfort Systems Empire Comfort Systems
Availability:
Product Code:EMPIRE-SR10T
Price: $383.40
*

Not Purchasable: Not done configuring

Qty
Free Shipping on all Orders!
  • Description

    Space-saving efficiency and top-mounted controls make the SR-10T an outstanding heater to add radiant heat to your smaller rooms and, when allowed, the SR10T is even ideal for bedrooms. Gas heaters are more cost efficient to operate compared to electric space heaters and they will continue to operate if there is a power failure. The SR10T has a matchless, push-button igniter to light the pilot and it is equipped with a thermostat control. If wall mounting is a problem in the space you are heating, a floor stand for installation is available (sold separately).
    • Test-fired in the factory
    • Oxygen-Depletion Sensor shuts off the unit if there is not enough available fresh air
    • Quiet as a whisper
    • Durable, scratch-resistant finish
    Vent-Free Products are intended to be used as a supplemental or secondary heat source. If window condensation problems are common in your home, installing a vent-free heater may not be a good option for you. 

    This appliance may be installed in an aftermarket manufactured (mobile) home, where not prohibited by state or local codes. A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.

    Available in Natural Gas SR-10TN and Liquid Propane SR-10TL

  • Tech Specs

    Heating BTUs
    10000
    Control Type
    Thermostatic
    Number of Control Settings
    1
    Ignition Type
    Standing Pilot
    Blower
    Not Available
    Floor Stand Kit
    Optional
    Wall Mounting Kit
    Included
    Gas Connection Size
    3/8"
    Min. Clearance to Combustibles
    Left side 6 inches, Right side 6 inches, Do not install in alcove or closet, Rear wall 0 inches, Ceiling 24 inches, Minimum vertical clearance from a projection above the appliance (shelves, window sills, etc.) 14 inches, Maximum horizontal extension of projection above the appliance 12 inches, Floor (top surface of carpeting, tile, etc.) 2 inches
    Flame Type
    Infrared/Radiant
    Width (in.)
    11.875 "
    Depth (in.)
    6.5 "
    Height (in.)
    22 "
    Clearance to Side Wall (in.)
    6 "
    Clearance Top to Ceiling (in.)
    24 "
    Clearance Bottom to Floor
    2
    Net Weight (lbs.)
    18
    Certifications
    AHRI, Design Certified
    Parts Warranty
    5 Years
    Labor Warranty
    5 Years

  • Manuals and Guides