Heating > Gas Heat > Vent Free Heaters > Empire Comfort Systems SR-30 Vent Free Gas Heater with Manual Control

Empire Comfort Systems SR-30 Vent Free Gas Heater with Manual Control

Empire Comfort Systems Empire Comfort Systems
Availability: Usually Leaves Warehouse in 2 - 3 Business Days
Product Code:EMPIRE-SR30
Price: $498.60
*

Not Purchasable: Not done configuring

Qty
or
Loading Bread...
Free Shipping on all Orders!
  • Description

    When heating large areas, the SR30 quickly heats a room with 30,000 BTUs at the touch of a button. This unit features controls on the top of the unit that are easy to use. A push button igniter lights the pilot, eliminating the need for matches. The heater will also function in the event of a power outage since gas heater do not require electricity unless a blower is installed.

    The SR-30 has manual controls and settings of 10,000, 20,000 or 30,000 BTUs. 

    Vent-Free Products are intended to be used as a supplemental or secondary heat source. If window condensation problems are common in your home, installing a vent-free heater may not be a good option for you. 

    • Oxygen-Depletion Sensor shuts off the unit if there is not enough available fresh air
    • Neutral colored, durable, scratch-resistant finish
    • Gas heats cleanly and efficiently and is more cost efficient versus electric heat
    Available in Natural Gas SR-30N and Liquid Propane SR-30L

    This gas heater may be installed in an aftermarket manufactured (mobile) home, where not prohibited by state or local codes. A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
  • Tech Specs

    Heating BTUs
    30000
    Control Type
    Manual
    Number of Control Settings
    3
    Ignition Type
    Standing Pilot
    Blower
    Not Available
    Floor Stand Kit
    Optional
    Wall Mounting Kit
    Included
    Gas Connection Size
    3/8"
    Min. Clearance to Combustibles
    Left side 8 inches, Right side 8 inches, Do not install in alcove or closet, Rear wall 0 inches, Ceiling 36 inches, Minimum vertical clearance from a projection above the appliance (shelves, window sills, etc.) 36 inches, Maximum horizontal extension of projection above the appliance 36 inches, Floor (top surface of carpeting, tile, etc.) 2 inches
    Flame Type
    Infrared/Radiant
    Width (in.)
    24.125 "
    Depth (in.)
    6.5 "
    Height (in.)
    22 "
    Clearance to Side Wall (in.)
    8 "
    Clearance Top to Ceiling (in.)
    36 "
    Clearance Bottom to Floor
    2
    Net Weight (lbs.)
    35
    Certifications
    AHRI, Design Certified
    Parts Warranty
    5 Years
    Labor Warranty
    5 Years
  • Manuals and Guides