White Mountain Hearth Ponderosa Log Set - Choice of Vent Free Burner
White Mountain Hearth Ponderosa Refractory Log Set offers a long lasting focal point in your fireplace. This beautiful 13-piece set is carefully crafted to reflect the beauty of the huge Ponderosa Pine. Standing almost 200 feet tall, the Ponderosa Pine can be found in the southern region of British Columbia, eastern Washington State and further south and east through many states. Each log is hand painted to create the true-to-life look of the dark, yet colorful bark and trunk of both younger and older trees for a most lifelike look. The Ponderosa log set will stack nicely on an Empire Slope Glaze burner. The 18" set will look great in a 32 inch firebox without getting lost. See Minimum Firebox Requirements Tab for details.
To create a more authentic burn pattern, complete with flickering flames coming up through the stack, the Slope Glaze Burners feature ceramic beads inside that force the gas to move around in the burner tube. Unlike a wood fire, the hand crafted, Ponderosa vent-free logs generate consistent, controlled heat, eliminating flare-ups and die-downs.
Ponderosa Logs are available in 18" (LS18-P), 24" (LS24-P) and 30" (LS30-P) sizes. White Mountain Hearth's Slope Glaze Burners are available in sizes to match the log sets and offer several valve options to help meet your needs:
- VFSM - Manual (No Remote Available) - operates manually with Off/Pilot/3 position heat setting knob; Cannot be used with wall thermostat or remotes
- VFSR - Millivolt (Remote Available, Not Included) - Standing Pilot, On/Off Remote Ready, Manual Hi/Lo temperature regulator knob (Available Remotes / Thermostats - sold separately)
- VFSV - Variable Flame, Height Control (Includes Remote) - Standing pilot with four level flame height control.
- VFSE - Intermittent Pilot (Programmable Remote Included) - Electronic Ignition with Remote Thermostat and Variable Flame Height Control
Both the VFSM (Manual) and VFSV (Variable) models are certified for installation in a vented fireplace. When installed in a vented application, each can only be used as a decorative gas appliance and cannot be operated with a remote. Your installer must block the fireplace damper partially open. A Damper Clamp is included for this purpose.
Your complete set will include the Ponderosa Logs and Burner/Grate Assembly (size, fuel type and valve chosen), Decorative Rocks, Glowing Embers (rock wool) for burner coverage, Valve Shield (VFSM model) and installation screws and damper clamp. The VFSV and VFSE models will include the Remote Kit.
A licensed gas technician is required for installation of this product. This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
- Type of Venting
- Vent Free
- Fireplace Style
- Single Sided
- Log Style
- Size of Log Set (in.)
- 18 "
- 24 "
- 30 "
- Warranty Detail
- Limited 5 Year Parts and Labor Warranty (Except Remote Controls, Thermostats, Accessories and Replacement Parts)
Manuals and Guides
Minimum Firebox Requirements
BTUs (Min./Max.) Req. Min. Rear Width (in.) (A) Req. Min. Depth (in.) (B) Req. Min. Front Width (in.) (C) Req. Min. Height (in.) (D) 18" Slope Glaze Burners VFSM - Manual Valve 22,000 / 32,000 BTUs 21 14 32 17 VFSR- Millivolt Valve 22,000 / 32,000 BTUs
VFSV- Variable Flame Height 21,000 / 32,000 BTUs VFSE- Intermittent Pilot 26,000 / 32,000 BTUs 24" Slope Glaze Burners VFSM - Manual Valve 22,000 / 36,000 BTUs 27 14 34 18 VFSR- Millivolt Valve 25,000 / 36,000 BTUs
VFSV- Variable Flame Height 24,000 / 36,000 BTUs VFSE- Intermittent Pilot 28,800 / 36,000 BTUs 30" Slope Glaze Burners VFSM - Manual Valve 22,000 / 38,000 BTUs 30 14 38 20 VFSR- Millivolt Valve 26,000 / 38,000 BTUs
VFSV- Variable Flame Height 27,000 / 38,000 BTUs VFSE- Intermittent Pilot 30,000 / 38,000 BTUs