Daikin KRP067A41 Series 15, 19 and 20 Interface Adaptor for Wired Remote Controller (9K and 12K Units)

Sku:
DAIKIN-KRP067A41
Please Call (877) 847-0050 for Availability
$255.00
It is not much to look at but this set is an interface adapter that is required to connect an indoor unit to a wired remote controller. It is a required interface for use with 9K and 12K Indoor units on the Daikin 15 and 19 Series Single Zone Systems when the connecting wall unit to the Daikin BRC944B2-A08 wired thermostat, as well as the FTXN and FTX indoor units connecting to the Daikin Envi DACATS11 wired thermostat.
  • Starting and stopping the air conditioner and making mode and temperature settings in the air conditioner through the wired remote controller (within a range of 18˚C to 32˚C while in cooling mode, 14˚C to 30˚C while in heating mode, but no temperature settings while in ventilation mode).
  • Monitoring the operating conditions, occurrence of errors, and contents of errors of the air conditioner through the wired remote controller.
  • Restoring the operating condition of the air conditioner to the previous condition at the time of power recovery in case of power failure.
This interface does NOT support the following functions:
  • Group control (i.e., the control a number of indoor units through a single remote controller)
  • Monitoring of the following items:
    • Indoor temperature and operating conditions of thermo, compressor, indoor fan, electric heater, and humidifier
  • Control of the following items:
    • Forced thermo OFF, filter sign display and reset, and air-conditioner charge management
  • Energy-saving reference, low-noise reference, and demand reference
Compatible indoor wall units include:
  • FTK09NMVJU
  • FTK12NMVJU
  • FTKN09NMVJU
  • FTKN12NMVJU
  • FTX09NMVJU
  • FTX12NMVJU
  • FTXN09NMVJU
  • FTXN12NMVJU
  • FTX09NMVJU
  • FTX12NMVJU
Daikin KRP067A41 Interface Adaptor for Wired Remote Controller

Product Overview

It is not much to look at but this set is an interface adapter that is required to connect an indoor unit to a wired remote controller. It is a required interface for use with 9K and 12K Indoor units on the Daikin 15 and 19 Series Single Zone Systems when the connecting wall unit to the Daikin BRC944B2-A08 wired thermostat, as well as the FTXN and FTX indoor units connecting to the Daikin Envi DACATS11 wired thermostat.
  • Starting and stopping the air conditioner and making mode and temperature settings in the air conditioner through the wired remote controller (within a range of 18˚C to 32˚C while in cooling mode, 14˚C to 30˚C while in heating mode, but no temperature settings while in ventilation mode).
  • Monitoring the operating conditions, occurrence of errors, and contents of errors of the air conditioner through the wired remote controller.
  • Restoring the operating condition of the air conditioner to the previous condition at the time of power recovery in case of power failure.
This interface does NOT support the following functions:
  • Group control (i.e., the control a number of indoor units through a single remote controller)
  • Monitoring of the following items:
    • Indoor temperature and operating conditions of thermo, compressor, indoor fan, electric heater, and humidifier
  • Control of the following items:
    • Forced thermo OFF, filter sign display and reset, and air-conditioner charge management
  • Energy-saving reference, low-noise reference, and demand reference
Compatible indoor wall units include:
  • FTK09NMVJU
  • FTK12NMVJU
  • FTKN09NMVJU
  • FTKN12NMVJU
  • FTX09NMVJU
  • FTX12NMVJU
  • FTXN09NMVJU
  • FTXN12NMVJU
  • FTX09NMVJU
  • FTX12NMVJU

Tech Specs

Product Type:
Interface Adapter
Use with Heat Pump:
Yes
WiFi Ready:
Not WiFi Compatible
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov