 |
 |
 |
|
 Monessen SSI30 Savannah 30600 BTU Wood Burning Insert with Refractory Liner and 160 CFM Variable Speed Blower. If you are tired of the inefficiency of your wood fireplace, the Savannah wood burning insert may be the answer to your problem. With the latest in wood burning technology, the SSI30 insert is not only an efficient heat source, but it can be installed easily into almost any existing fireplace. The Savannah SSW30 insert features 159 square inches of viewing area and will heat up to 2,200 square feet. The refractory liner promotes higher firebox temperatures and will protect the firebox for years - maintenance free. The unit ships as an all black unit, but door trims are an available option in either gold or nickel cast iron. Made in the USA. Item is shown with optional Nickel Trim.
Please check your fire and carbon monoxide detectors are in good working condition.
-
Dimensions:
-
Shipping Weight: 360 Lbs.
-
Firebox Size: 2 Cu. Ft.
-
Log Length: 20"
-
Fire Viewing Area: 159 sq. in.
-
BTU/hr EPA TEst Fuel:: 11,000-30,600 Grams/Hr.)
-
Combustion Efficiency: 63%
-
6" Flue required
-
Heating Capacity: 2,200 Sq. Ft.
-
Burn Time: Up to 10 hours
-
Dual Impeller Blower: 160 CFM
-
Emission: 3.5 G/hr
-
Minimum Clearances to Combustibles:
-
Washington State Approved
-
Warranty: Limited Lifetime. See User's Manual under Additional Resources Tab for full warrranty information.
-
Monessen recommends all woodburning hearth products be installed and serviced by a certified technician.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
-
Steel insert
-
Easily removeable baffle for in-place chimney cleaning
-
Standard side heat shields
-
Clean, non-sooting, glass
-
Heavy 5/16 plate steel top for durability
-
EPA Phase II and Washington State approved
-
High-tech combustion system with lively vibrant burn
-
Unique leveling system with rear roller
-
Removable flue collar for easy installation
-
Cast door and ash lip
-
Refractory lined firebox
-
6" Flue collar
-
Approved for masonry and factory built fireplaces
-
160 CFM variable speed thermally activated blower with manual overide
-
Combustion System:
-
Single Primary Air Intake/Control – conveniently regulates air to primary combustion zone and controls burn rate.
-
Air Wash Manifold – preheated air is dispersed downward to shield glass from soot particles and keep glass clean at all burn rates.
-
Secondary Air Inlets – preheated air is metered above the primary combustion zone to complete combustion of any unburned gases.
-
Refractory Baffle System – slows heated gases to promote complete combustion and efficient heat transfer.
-
Refractory Liner – promotes higher firebox temperatures for complete combustion and protects firebox for many years of maintenance free enjoyment
|
|
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
