• Color: Tan
• BTU Input: 32,5000
• Dimensions:
  • Register Length & Width: 34" x 22"
  • Casing Length & Width: 32" x 20"
  • Overall Length including Diverter: 40"
  • Floor Opening Length & Width: 32 5/16" x 20 5/16"
  • Height: 23 1/2"
  • Weight: 108 Lbs.
• Minimum Clearances to Combustibles:
  • Top must be open and clear of all objects and covering
  • Each Side to Nearest Wall: 6"
  • Bottom of Unit for Air: 6"
  • Draft Diverter and Vent Connector: 6"
  • Two Adjoining Sides to Walls: 18"
• Gas Inlet:
  • Iron Pipe Size (N.P.T): 1/2"
  • Inlet to Floor: 18 3/8"
• Venting:
  • Floor to Top of Diverter Shield: 9"
  • Center of Flue to Floor Covering: 15 7/8"
  • Size of Flue Collar: 4" Diameter
  • The flue pipe diameter must be as large as the flue collar on the draft diverter and run as directly as possible to the chimney at least 1/4" rise per foot of run, properly supported by metal straps, and enter the chimney so the end of the flue pipe is flush with the inner wall of the chimney.
  • Any pipe passing throught the walls and roof must be "B" Type vent.
  • The chimney must extend at least two feet above the roof and any object or building within 10 feet of the chimney.
  • The flue pipe must not have any open tees or be connected to the chimney of any existing fireplace
• Temperature Control: Millivolt Wall Thermostat (included -- click on "larger photo" to view)
• Ignition System: Matchless Piezo
• Safety Control: The pilot and main burner are equipped with an Automatic Shut-Off, Temperature Limit Controls, Flood Pan and Debris Pan
• Warranty: Combustion chamber carries a 10-year warranty. All other parts carry a 1-year limited warranty.

User's Manual (pdf file)

Specifications (pdf file)