• Amana PTACs have increased dehumidification capacity.  By maintaining lower humidity levels in rooms while cooling them without the need for expensive add-ons, Amana PTACs allow you to feel more comfortable at higher temperatures, thus reducing cooling costs.

• 5-Year Limited Warranty:  Amana PTACs come with one of the most comprehensive warranties in the industry, The first year both parts and labor are covered, the second year through the fifth year, parts and labor on certain sealed system components are covered, and certain functional parts only are covered in the second through fifth year.  Complete warranty details are available by clicking on the "Additional Resources" tab, then click on "Warranty.pdf".
• Amana tests every PTAC during assembly in their Fayetteville, TN plant and again prior to shipment.  They also perform leak tests.
• Amana PTACs have one of the industries' shallowest front depths at only 7¨ý¡±.  The front panel may be secured to the chassis with a hidden screw which helps prevent unauthorized tampering with the PTAC.
• Amana's removable condenser shroud allows easy access to enable regular cleaning of coils, which is essential to maintain unit efficiency and protect the compressor for long unit life.
• Every Amana PTAC comes with easy to pull-out filters which are washable and easy to maintain.  Charcoal filters (CFK10B) are available as an additional accessory.
• Amana PTACs include a filter dryer for the sealed system refrigerant.  This protects the compressor and lengthens the life of the PTAC by removing moisture and preventing acid formation.
• Every Amana PTAC has a 7-button touch pad and LED Display.  This makes it easy to use and set the temperature to your liking.
• The Amana Condensate Dispersion System removes condensate from indoor cooling operation by throwing water directly on to the outdoor coil for rapid evaporation and increased cooling efficiencies.  The slinger ring on the new, enhanced fan draws water up and into the fan blades.  This water is then atomized and evaporated into the atmosphere through the condenser.  Increased surface area from the coil allows more water to be evaporated on the sides of the coils and helps to minimize condensate run-off.
• Front Desk Control is a useful feature for motels, hotels, and other multi room establishments.  Each unit comes equipped with the DigiSmart¢â control and energy management software.  With Digi-Smart¢â, using the optional RF antennae, all units can be wirelessly connected to a central hub for enhanced energy savings and diagnostics.  Amana brand PTACs also has a low-voltage interface capability with a field-supplied front-desk ON/OFF switch.  Call us for more details.
• Every Amana PTAC has room freeze protection.  If the PTAC senses temperatures of 40¡ÆF or below, automatically the unit activates the fan motor and either the electric resistance heater or the hydronic heater will be activated.
• The controls on every Amana PTAC are easy to use.  A simple efficient layout of the 7 button control panel makes operation effortless.
• Amana's newly designed front and neutral color make it compatible with virtually any room decor.
• Amana has engineered an easy to read diagnostic system using on-board LEDs taking out the guess work should a problem arise. 
• Amana's use of a stonewood room front balances practical design and attractive styling.  Add the fact that the sleek 7¨ý¡± depth maximizes the usable space of your room.
• Amana's PTACs can be installed flush to a finished floor if desired.
• Amana's built-in 30 second fan-off delay allows the fan to continue after the compressor stops.  This feature improves efficiency by dispersing the heated or cooled air into the room instead of wasting the conditioned air and leaving it on the coils.
• Amana's compressor lock-in feature helps prolong compressor life by preventing short-cycling.   When the compressor is switched from Off to On because room temperature has risen or fallen below the specified limit, it will remain on for at least 4 minutes.  If the temperature set-point is changed during these 4 minutes, the lock-in feature is overridden.
• With the use of the 7 button control panel, you can override the predetermined fan mode for either continuous operation or cycle mode with the thermostat on a temporary basis.
• Hidden ventilation control allows you to manage ventilation requirements.
• Made in the USA

Voltage:  230 / 208
Capacity (BTU/h):  11,500 / 11,200
Amps:  5.6 / 5.6
Watts:  1095 / 1075
EER:  10.5 / 10.4

Minimum Circuit Amps:  6.8
CFM (Cool/Wet Coil) High / Low:  290 / 264
CFM (Dry Coil) High / Low:  310 / 282
Ventilated Air CFM (Fan Only):  65
Dehumidification (Pints/Hr.):  3.6
Net Weight:  106
Ship Weight: 123

Electric Heat (kW):  2.5
Number of Stages:  1
Nominal Heating (BTU/h) @ 230 Volts:  8,500
Nominal Heating (BTU/h) @ 208 Volts:  6,800
Total Watts 230 / 208 Volts:  2,570 / 2,115
Total Amps 230 / 208 Volts:  11.2 / 10.1
Minimum Circuit Ampacity:  14.0
MOP Amps:  15
Power Cord:  6-15P

Fits Standard PTAC Sleeve Size:    42" W x 16 1/16" H x 14 1/8" D

User's Manual (pdf file)

PTAC Catalog (pdf file)

Sleeve Installation Guide (pdf file)

Warranty (pdf file)

Parts List (pdf file)

Spec Sheet (pdf file)