Simple, Flexible Venting: Ideal for heating a room addition - especially when running central furnace ductwork is impractical. With optional venting that allows runs up to 15 feet verticaly or horizontally, the DV-40E can be installed on almost any wall, including the main floor, basement or upstairs.
Each wall furnace includes a vent termination for basic installation on an outside wall up to 10" thick. The optional DVT-2 vent extension accommodates walls up to 32" thick
Power Venting Delivers More Efficient Heat: State-of-the-art power-vent inducer draws outdoor air into the combustion chamber at the optimal rate to support clean combustion. The hot combustion gases are forced through the inside of the unique tubular heat exchanger toward the exhaust. Outside the heat exchanger, a dual fan air circulation system blows room air across the tubing to extract the maximum available heat. The counterflow action starts at the top of the unit and exits at floor level so the warm air will rise naturally in your living space to provide the greatest comfort. Because room air always stays separated from combustion air, you enjoy cleaner, healthier heat, without creating negative pressure within the home that can draw in cold air.
Total warmth for a fraction of the cost of electric heat
Utilizes State-of-the-Art Technology for added fuel efficiency
Electronic Thermistor Thermostat monitors furnace operation
Optional Wall Thermostat hook-up is standard and will accept any 24-volt wall thermostat
Complete with Blower for proper circulation and even heat distribution
Hot Surface Ignition
Sealed Combustion Chamber maintains indoor air quality
Peace-of-mind safety features built into each furnace
Standard Unit Vents through a wall up to 10 inches deep (extended horizontal vent run for up to 32" is available as an accessory)
Mobile Home Certified