Air Conditioners > Types of Air Conditioners > Ductless Mini Split Air Conditioners > Single Zone Mini Split Systems > Friedrich M09CJ 9,000 BTU 21.5 SEER Cooling Mini Split Air Conditioner with Precision Inverter System, 115V

Friedrich M09CJ 9,000 BTU 21.5 SEER Cooling Mini Split Air Conditioner with Precision Inverter System, 115V

Friedrich Friedrich
Availability:
Product Code:FRIEDRICH-M09CJ
Price: $919.00
WHY ADD THIS TO MY ORDER?
Qty
Free Shipping on all Orders!
  • Description

    This cooling only, Energy Star Qualified, ductless mini split features 9000 BTUs and is perfect for smaller rooms that are about 400 sq. ft. With the Friedrich Precision Inverter Technology, the room you are cooling will reach the set temperature faster and more efficiently. You will also experience energy cost savings because if its 13.3 EER. The M09CJ is residential ready with its 115 Volt electrical requirement. 

    Friedrich's Precision Inverter accomplishes better energy efficiency by using 1Hz increments rather than 7Hz increments used by typical inverter systems. Systems that have inverter technology typically increase efficiency because the compressor powers down rather than powering off when it reaches the set temperature, which, in turn,  reduces energy consumption.

    Precision Inverter Technology allows each system to adjust capacity and cooling output to provide only the amount of cooling needed at a given time. For example, an 18,000 BTU/h system will operate even more efficiently as a 15,500 if that is all that's needed.

    In addition, The Friedrich M09CJ Mini Split System offers many unique features such as 4-Way Auto Swing Louvers (Up/Down and Left/Right), Auto Restart in case of power failure, Washable reusable filters, and Low Ambient Operation which will have the unit operating safely in temperatures as low as 14ºF.

    The Wireless Thermostat offers 24-Hour timer, Sleep mode, Auto/cool/dry/fan modes, four fan speeds plus auto fan.

    Outdoor unit comes pre-charged with enough refrigerant for 25 ft. of line. Line sets are sold and purchased separately. In most cases your system can be up and running in a few short hours. The mounting bracket is preset with holes at 16" to secure easily to your wall studs. Once installed, you do not need to remove it seasonally.

    Features of the Friedrich mini-split include:
    • DiamonGold Advanced Corrosion Protection - Protects the outdoor coil against deterioration and extends the life of the unit especially in harsh coastal environments
    • Lower utility bills - Unlike central air conditioners that cool all the areas the same, ductless systems cool only those rooms you tell it to. No more wasted dollars on cooling unused rooms
    • Ultra quiet operation - Ductless systems are in sharp contrast to other types of air conditioners where the rush of air from ducted vents can be annoying, or where compressor noise of window units can be objectionable
    • Security advantage - Only a small 3 inch hole is needed for connecting indoor and outdoor units. No worries about intrusion through window installations or wall openings
    • Low ambient cooling - When outdoor temperatures fall to 14ºF, this system will safely cool. This is an important feature for computer, telecom and electronic gear rooms, or any other room that require year-round cooling. An additional Low Ambient Wind Baffle Kit (DLAWB1) which allows operation down to 0ºF, can be purchased separately.
    This unit must be installed by a qualified licensed HVAC technician.

    Line sets are not included.
    • Auto dry indoor coil
    • Cooling/Fan mode
    • Surge cool
    • Natural air flow
    • 4-Way auto swing
    • Ultra quiet operation
    • Sleep mode
    • Dehumidifying mode
    • Auto restart
    • 24-hour on-off timer
    • Condensate sensor connection
  • Tech Specs

    Bundle Includes
    FRIEDRICH-MR09C1J,FRIEDRICH-MW09C1J
    Indoor Unit Type
    Wall Mount
    EER
    13.3
    SEER
    21.5
    Energy Star
    Yes
    Cooling BTUs
    9000
    Cooling BTU Output Range
    3070 - 12120
    Cooling Amps
    12
    Dehumidification (pts/hr)
    2.6
    Includes Heat Pump
    No
    CFMs
    124 / 212 / 272 / 335 (Q / L / M / H)
    Fan Speeds
    4
    Room Size Coverage
    Medium 300 - 525 Sq. Ft.
    Min. Indoor Noise Level (dBA)
    19
    Indoor Noise Level (dBA)
    19 / 24 / 33 / 38 (Q / L / M / H)
    Outdoor Unit Noise Level (dBA)
    45
    Control Type
    Hand Held Remote
    Wired Thermostat Optional
    No
    Voltage
    110-120V
    Circuit Breaker Size (Amps)
    20
    Line Set Liquid Line
    1/4"
    Line Set Suction Line
    3/8"
    Maximum Elevation (ft.)
    33
    Maximum Pipe Length (ft.)
    66
    Pipe Length (No Addl Refr Req)
    41
    Operating Range - Cooling
    14°F - 118°F
    Inverter Technology
    Yes
    Indoor Unit Width (in.)
    35.25 "
    Indoor Unit Depth (in.)
    8.313 "
    Indoor Unit Height (in.)
    11.25 "
    Outdoor Unit Width (in.)
    30.313 "
    Outdoor Unit Depth (in.)
    11.313 "
    Outdoor Unit Height (in.)
    21.313 "
    Indoor Unit Weight (lbs.)
    23
    Outdoor Unit Weight (lbs.)
    75
    Certifications
    ETL, ETLc
    Parts Warranty
    5 Years
    Labor Warranty
    None
    Compressor Warranty
    7 Years

  • Manuals and Guides

  • Warranty

    Warranty Information

    • Parts: 5 Years
    • Compressor: 7 Years
    • Labor: None

    The warranty for this unit is for parts only, and does not cover labor or diagnostic services. Total Home Supply will handle all warranty parts requests for any mini split purchased from us, but installation and all troubleshooting for this unit must be performed by a licensed HVAC technician. Any fees the technician may charge are not reimbursable by the manufacturer or by Total Home Supply. Please call 877-847-0050 for more details or with any questions you may have regarding warranty information and installation of this unit.