Available in: Natural Gas (NG) and Propane (LP)
Temperature Settings: 100-180° F (14 options)
Thermal efficiency for all models: 84%
Self-diagnostic onboard computer system: Yes
Battery back-up compatible: Yes
Recirculation compatible: Yes
Digital remote included: Yes
Type: Indoor / Outdoor, Wall Mounted, Power Vented
Ignition: Direct Ignition
Operating Pressure: 15-150 psi
Minimum Flow Rate: 0.5 GPM
Dimensions: 23.6" H x 13.8" W x 9.4" D
Weight: 47 lbs.
Water Holding Capacity: 0.2 Gallons
Connection Sizes: Water Inlet: 3/4"
Hot Water Outlet: 3/4"
Gas Inlet: 3/4"
Power Supply:Supply: 120 VAC (60Hz)
Consumption: NG: 65W
LP: 75W
Freeze Prevention: 145W
Materials:Casing: Zincified Steel Plate / Polyester Coating
Flue Collar: Stainless Steel
Heat Exchanger: Copper Sheeting, Copper Tubing
Safety Devices: Flame Rod, Thermal Fuse, Lightning Protection Device (ZNR), Overheat Prevention Device, Freezing Prevention Device, Fan Rotation Detector
Accessories: Remote Controller, Remote Controller Cord, Anchoring Screw, Power Cord
Warranty: This Warranty is extended by Noritz to the Owner for the duration of this Warranty. This Warranty takes effect on the date of installation of the Product by the Noritz Authorized Installer or 30 days after the date of purchase, whichever occurs first, and is effective until the specified anniversary of such date as follows:
1. 12 years replacement on heat exchanger when the product is used in a single family dwelling.
2. For Commercial products, 5 years replacement on heat exchanger when the product is used for
commercial capacity, if it is used in other than a single family dwelling, or if the product is supplied
with pre-heated or circulated water.
3. For Residential products, 3 years replacement on heat exchanger when the product is used for
commercial capacity, if it is used in other than a single family dwelling, or if the product is supplied
with pre-heated or circulated water.
4. Parts other than heat exchanger, 5 years replacement of defective parts.
5. 1 year approved reasonable labor.
WARNING!!! PVC cannot be used for venting. Use only Category III (4" stainless steel venting). NR98-DVC requires 3" x 5" concentric-type stainless steel venting.