Home and Garden > Hot Water Heaters > Bradford White SW-2-65-L 60 Gallon, Powerstor, Indirect Fired Water Heater

Bradford White SW-2-65-L 60 Gallon, Powerstor, Indirect Fired Water Heater

Bradford White Bradford White
Availability:
Product Code:BRADFORD-SW265L
Price: $1,555.00
Qty
Free Shipping on all Orders!
  • Description

    Let your boiler do double duty. With an indirect fired water heater like the SW-2-65-L from Bradford White, your water is heated by your boiler. During the colder months, when your boiler is on, this is a cost efficient way to get your hot water. Heating systems are generally more efficient than hot water heaters so even during the summer, you're more likely to save money using an indirect system. Regardless of the type of boiler you have in your home - hot water, steam, oil or gas - you can heat your hot water with an indirect fired water heater.

    The coil sits in your tank is and connected to the boiler where the water flows into and circulates through the heat exchanger heating the water in the tank quickly and efficiently, recovering the hot water in a short amount of time.

    With a Bradford White Indirect Fired Water Heater you may not ever have to replace your water heater again! Since there is no fire, there is less tank expansion, less wear and tear, longer life.

    There is no burner or internal pilot system in an indirect fired water heater, therefore the life of your hot water tank is prolonged. The SW-2-65-L is a single wall, indirect fired hot water heater. It features a 60 gallon capacity and based on your boiler output BTUs, boiler water temperature and water inlet temperature, your first hour ratings will vary. 

    As an example, the DOE Water Heater Performance for this hot water heater is as follows: 
    • Boiler output of 220,000 BTUs, boiler water temperature of 200°F and a 50°F water inlet temperature:
      • First hour rating for 140°F water is 306 gallons assuming approximately 4.2 gallons/minute of continuous draw
      • First hour rating for 115°F water is 456 gallons assuming approximately 6.7 gallons/minute of continuous draw
    The AHRI Water Heater Rating for this hot water heater use the following assumptions: 
    • Boiler output of 157,000 BTUs, boiler water temperature of 180°F
      • First Hour Delivery: 275 gallons
      • Continuous Draw Rating at 135°F: 235 gals/hr.
      • Standby Heat Loss Rating (°F/HR): 0.7 
      • Heat Source Flow Rate: 13.7 gals/min.
    Standard features include:

    Hydrojet® Total Performance System: Helps reduce the sediment that comes into the tank, therefore reducing the sediment in the tank for faster recovery.

    Vitraglas®: The Heat Exchanger is a 1-1/2" Vitraglas-coated carbon steel coil and the tank is lined with Vitraglas as well. Vitraglas protects the system from the corrosive effects of hot water.

    The SW-2-65-L has Limited Lifetime Tank and Heat Exchanger Warranties and a 6 Year Limited Warranty on Component Parts.

    Features
    • 1" supply and return connections
    • Fully automatic controls
    • Three protective aluminum anode rods
    • Factory installed dielectric nipples
    • T&P valve included
    • Brass drain valve
    • 2" Non-CFC foam insulation
  • Tech Specs

    Capacity (Gallons)
    60
    Fuel Type
    Connects to Boiler
    Includes Heat Pump
    No
    Energy Star
    No
    Overall Depth (in.)
    22 "
    Overall Height (in.)
    60 "
    Overall Width (in.)
    22 "
    Net Weight (lbs.)
    225
    Water Connection Size
    3/4" NPT

  • Manuals and Guides

  • More Info

    • Dimensions:
      • A - Floor to Heater Top: 59 1/4"
      • B - Jacket Dimensions: 22"
      • C - Floor to T&P Connection: 53 1/8"
      • D - Floor to Water Connection: 60"
      • E - Floor to Exchanger Outlet: 5 3/8"
      • F - Floor to Exchanger Inlet: 27 1/2"
      • G - Floor to Aquastat: 11 1/2"