White Mountain Hearth VSR-18P 18" Millivolt Valve Vented Slope Glaze Burner - Liquid Propane

Sku:
EMPIRE-VSR18P
Usually Leaves Warehouse in 2 - 3 Business Days
$859.00
This burner is certified for use in an existing fireplace with an open damper flue. Vented systems do not burn the gas used cleanly and therefore need to be exhausted through an open chimney - similar to burning wood. A vented burner can only be used in this application. It is not convertible to vent-free operation. A vented burner can be rated up to 75,000 BTUs to create taller flames but is still only rated as a decorative system and is not for use as a heat source and cannot be operated by a thermostat. A vented burner is only available in a manual model and a millivolt model. This is a millivolt model. The BTU input range is from 40000 (reduced*) to 65000.

The main advantage of a vented burner is the more realistic yellow flame created by the open flue. Unfortunately, to get the more realistic fire-look, the heat goes up the chimney as well.

  • If you are only looking for a decorative, non-heat source with more realistic fire then a Vented Burner is what you want in a gas log set.Vented
  • This log set is to be installed only in a solid-fuel burning fireplace with a working flue constructed of non-combustible material. The vent damper must also have a damper clamp attached to it to keep the damper from accidentally closing during operation.
  • Certified for installation as vented log set ONLY. The installer must block the fireplace damper partially open. A special flue-damper clamp is included with burner
This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.
 
A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.

*An additional main burner orifice is provided in instruction package envelope to reduce input of the vented burner assembly.

  • Regular Pressure Setting: 10.0" W.C.
  • Gas Inlet Pressure Max: 13.0" W.C.
  • Gas Inlet Pressure Min: 11.0" W.C.
*An additional main burner orifice is provided in instruction package envelope to reduce input of the vented burner assembly.
FREE SHIPPING ON ALL ORDERS!
White Mountain Hearth VSR-18P 18" Millivolt Valve Vented Slope Glaze Burner - Liquid Propane

Product Overview

This burner is certified for use in an existing fireplace with an open damper flue. Vented systems do not burn the gas used cleanly and therefore need to be exhausted through an open chimney - similar to burning wood. A vented burner can only be used in this application. It is not convertible to vent-free operation. A vented burner can be rated up to 75,000 BTUs to create taller flames but is still only rated as a decorative system and is not for use as a heat source and cannot be operated by a thermostat. A vented burner is only available in a manual model and a millivolt model. This is a millivolt model. The BTU input range is from 40000 (reduced*) to 65000.

The main advantage of a vented burner is the more realistic yellow flame created by the open flue. Unfortunately, to get the more realistic fire-look, the heat goes up the chimney as well.

  • If you are only looking for a decorative, non-heat source with more realistic fire then a Vented Burner is what you want in a gas log set.Vented
  • This log set is to be installed only in a solid-fuel burning fireplace with a working flue constructed of non-combustible material. The vent damper must also have a damper clamp attached to it to keep the damper from accidentally closing during operation.
  • Certified for installation as vented log set ONLY. The installer must block the fireplace damper partially open. A special flue-damper clamp is included with burner
This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.
 
A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.

*An additional main burner orifice is provided in instruction package envelope to reduce input of the vented burner assembly.

  • Regular Pressure Setting: 10.0" W.C.
  • Gas Inlet Pressure Max: 13.0" W.C.
  • Gas Inlet Pressure Min: 11.0" W.C.
*An additional main burner orifice is provided in instruction package envelope to reduce input of the vented burner assembly.

Tech Specs

General Features

Fireplace Style:
Single Sided
Location of Use:
Indoor
Type of Venting:
Vented
Media Style:
Traditional Log Set
Type of Grate:
Standard
Fuel Type:
Liquid Propane (LP)
Allowable Log Set Sizes (in.):
18"
Certified Usage:
Mobile Home Approved

Performance

BTUs (Max.):
65000
Ignition Type:
Millivolt (Remote Ready)
Remote:
Optional

Gas Requirements

Gas Connection Size (in.):
1/2"
Manifold Pressure (in.):
10.0" w.c.
Inlet Gas Pressure (Min.):
11.0" w.c.
Inlet Gas Pressure (Max.):
13.0" w.c.

Minimum Fireplace Requirements

Requirements for 18" Logs

Req. Min. Front Width (in.):
28"
Req. Min. Rear Width (in.):
17"
Req. Min. Depth (in.):
15"
Req. Min. Height (in.):
22"
Net Weight (lbs.):
25
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov